For the mom who gives us everything - Mother's Day gifts that connects us.
AT&T Fiber Equipment

AT&T Fiber Equipment

Learn more about your Internet with AT&T Fiber equipment.

8.3K

Ask a question

Pinned posts

(0)
No conversations found!
(8064)
R
Need help from AT&T to investigate a bad route

I have AT&T 1 gig fiber and my brother has Comcast 1 gig service and lives about 2 hours away from me. Whenever I transfer files to him, the average speed is 2MB/s! With 1 gig upload, I'd expect to get -AROUND- 90MB/s. I only have this slow upload problem to him, nobody else. I have tried conne

Questions

23

4

0

Connect to Guest Network via Ethernet?

I have a BGW320-505 with the guest network enabled. I use the guest network for my IOT / Smart Home devices.  However, my security cameras connect to a base station that must be hard-wired to the router via ethernet.  Is it possible to connect to the guest network via ethernet?  Than

Questions

18

3

0

Accepted Solution

Closed

Can you set up VPN on humax bgw320-500?

Can you set up VPN on humax bgw320-500?

Questions

2.9K

2

0

Internet speeds coming out of modem are much lower than speeds coming in.

I know that I will not be getting all 1 GIG of the fiber that I pay for, while I do get the 800-900 mbps for my download speeds, I only get around 110-130 mbps for my upload. I have rebooted my modem as well as restarting my PC several times to try and resolve the issue. I am using a direct ethernet

Questions

54

9

0

Slow download speeds from gateway to devices

I have tried all manner of troubleshooting: reboots, new channels, straightening the fiber line, etc., and I unable to receive wifi download speeds of higher than ~5 mbps (upload speeds >100 mbps) while the signal to the router is fine >300 mbps). I have multiple devices with this problem. AT&

Questions

34

4

0

consistently getting server disconnections while gaming on ethernet. wifi does not disconnect

on my PC, I am wired with the ethernet cable to the motherboard. i’ve tried both ports on the motherboard and have the same issues. this issue has only started happening since I got fiber internet installed. I did not have this issue with my previous internet provider.  my issue is: I get ra

Questions

24

2

0

Accepted Solution

Official Solution

BGW210-700 drops all incoming 6in4 packets?

I'm trying to set up a Hurricane Electric IPv6 tunnel using an OPNsense system behind a BGW210-700 RG, but it turns out that despite disabling the packet filter and pretty much every other firewall option in the RG, it drops all incoming 6in4 (IP protocol 41) packets. The logs list the reason as "U

Questions

115

10

0

Have device with static WAN IP, but cannot reach the web interface on the device from the internet using port 4443

We received AT&T Business High Speed Internet (not dedicated) service today and received 5 static IPs. Setup our firewall behind the ATT device with one of the static IPs.  It appears to work fine for all outbound traffic.  Our firewall has an https web interface on TCP port 4443. I c

Questions

16

1

0

BGW320 - is there a way to backup the config?

I have quite a detailed configuration on my router. Is there a way to back up the config to a file and download it? I'd like to be able to restore the config from a backup file like you can with REAL network equipment. Thanks.

Questions

217

9

0

Other wire in fiber terminal box

What’s this other wire for? It has a red and clear plastic 3M cap on it.

Questions

35

6

0

Be the first to reply

(2)
Downed communication wire

I scrap metals on my off time and noticed some cut wire laying in the ditch. Is it ok for me to pick this up so I can scrap it?

Questions

30

0

Failover Doesn't work with Unifi Equipment

My primary Internet connection is with the BGW320-505 setup in Pass-through mode connected to my Unifi Dream Machine Pro. (UDMP) My secondary Internet connection is with Xfinity cable modem.  This is a great secondary option for me as it only costs me $20 a month.  The issue is, I've ha

Questions

56

0

Trending Accepted Solutions

(1)

Accepted Solution

Firewall failover cluster behind BGW320-500 with Static /29

I can't seem to find a way to pass our static IP block through the RG to our redundant firewalls which each need to have their own address and 2 that they share between them for failover. I am not able to get inbound traffic such as VPN to pass to the firewall. I have tried passthrough with manual I

Questions

26

3

0

Frequently Asked Questions

Expand all
Not finding what you're looking for?

Got a few minutes to learn more?

Check out these informative articles and resources.

Abstract rendering of Fiber optic internet.

EXPLAINER

What’s fiber internet?

Between remote work, gaming, streaming videos, social media, email, and so on, many of us spend a huge portion of our lives online. That’s what draws so many people to internet powered by fiber.
Woman working from home and videoconferencing with several colleagues.

TRENDING NOW

AT&T Fiber now delivers speeds up to 5 GIG

Is your home internet fast enough? Depending on speed tier availability and your household’s connectivity needs, you may choose an AT&T Fiber plan with hyper-gig speeds.
Three kids lounging on a sofa and browsing the web on their respective devices.

BLOG

A quick introduction to Wi-Fi 6

Wi-Fi 6 was designed to improve on previous standards in several ways, including more efficient battery usage, higher maximum bandwidth, improve security features, and more!
How can we help you today?
Shop phones
& devices
Bring your
own device
Upgrade phone
Add a line
to your plan
Download
myAT&T app
Get help online
Visit a store
New to AT&T Community?
New to the AT&T Community? Start by visiting the Community How-To.
New to the AT&T Community?
Visit the Community How-To.