Teacher
•
3 Messages
U-verse for BUSINESS? : 2Wire 3600HGV bridge mode? or another AT&T supported VDSL modem?
I am having trouble properly configuring this AT&T 2Wire 3600HGV modem for my network. Maybe someone is aware of a different firmware for this product?
I am completely aware of how to setup the DMZ mode & router behind router setup in these boxes but that is NOT the point. (We have supported firewalled networked equipment working that has all the bells & whistles including QoS)
In the event of a factory reset of the AT&T 2Wire VDSL modem at this business, I want to properly insure the following business requirements are met:
- DHCP - OFF (at min, it appears you must leave one available?)
- WiFi - OFF (Yes this can be turned off, but bridging it always insured it was turned off in the past. ON is a security concern among just bad business i.e. conflict with other business WiFi, employees might see/use this non-content filtered WiFi, etc etc)
- & passing off internet service needs to be easy to another networked supported OUTSIDE of AT&T firewall. (I'm NOT asking for AT&T support on this, but in the bridge DSL world, this was EASY)
- if bridging this 2Wire is NOT an option, backing up the configuration settings would be a nice alternative but that is not available as well?
Bridging the old DSL modems always worked nicely but the 2Wire 3XXXHGV line appears to be the ONLY ones to support the AT&T VDSL Max Turbo speeds. 24Mbps down / 3 Mbps up which we use not only for normal business operations (credit cards, business email, web based training, etc) but this high speed is required to view onsite security video (3Mbps up) and offer customers FAST free WiFi!
AT&T U-Verse offers the right price, contract, speed, internet package & installers to properly handle our resturant locations company's data needs but I'm struggling with the their "business" support of this 2Wire VDSL modem product. We ONLY use the internet, no TV (not legally available for restaurants, yet). No Voip because POTS is our reliable backup. So it's just the internet service ...
For coverage on AT&T Uverse, we have over 50 locations lit up like a Christmas tree but sadly business support on this product is driving me nutz! Maybe because I now see this is listed under "Residential Gateway"? Is this AT&T 2Wire VDSL modem product not meant for business? Is anyone aware of another supported AT&T VDSL modem or a different 2Wire firmware available? Official AT&T support has me running in circles (AT&T U-verse support > AT&T Connecttech > AT&T Connecttech360 > AT&T U-verse support, rinse, repeat)
help?
vanhoand
Teacher
•
20 Messages
12 years ago
Eh... setup isn't going as planned. I set the static IP and subnet on my router to your suggestions but when I try to save the changes, I get this error "IP is out of range in [1-254]". I'm not really sure why though b/c I've set the static IP to 192.168.1.10. And that seems to be in range...
I tried attaching a picture of my routers admin panel but doesn't look like I can upload for some reason. Here's what I've got...
Under Internet Settings, I've got 192.168.1.10 for my IP, 255.255.255.0 for the Subnet Mask, and 0's for Default Gateway and DNS 1 through 3.
Under Network Setup, I've got the router IP still set to 192.168.1.1 but tried changing that to .10 and i get the same error.
I've disabled DHCP Server.
any ideas?
0
0
SomeJoe7777
Expert
•
9.4K Messages
12 years ago
Change the addressing on the LAN to 192.168.1.10.
Disable the LAN DHCP server.
0
0
vanhoand
Teacher
•
20 Messages
12 years ago
THANKS!
0
0
danlintz
Contributor
•
2 Messages
12 years ago
Hi -
Got the bridge going with an Asus RT-16 however my OUTgoing email fails. Double checked all the settings in the setup mentioned on the first page of this thread but no luck. Incoming works fine. Did reboots etc. double checked the smtp was was good for outgoing.
Also using RT-16 in 192.168.2.1-254 network with static IP of public IP from 2wire in WAN mode on RT-16.
Any suggestions?
Thank you!
0
0
SomeJoe7777
Expert
•
9.4K Messages
12 years ago
See the following post for possible solutions:
http://forums.att.com/t5/Features-and-How-To/Cannot-send-email-on-laptop/m-p/3000015#M30750
0
0
danlintz
Contributor
•
2 Messages
12 years ago
Thx!
Wow very suprized they block 25 never had that issue on ANY other ISP including comcast which I will not cancel if they don't open this port my emai service is not going to change.
Thanks again! - dan
0
0
gbh62
Scholar
•
255 Messages
12 years ago
Joe,
I assume these instructions allow connecting to either the RG access point, or the new routers access point? Is that correct? And, and, as far as the LAN, anything wired or wireless will be able to communicate.
I have the same issue. The RG wireless range isn't good enough. I see significant dropoff in speed beyond about 30 feet or so. A couple walls, single story home.
Just bought a refurb Cisco E2500 which is supposed to have "good" range, whatever that means.
0
0
SomeJoe7777
Expert
•
9.4K Messages
12 years ago
0
0
atbodamer
Tutor
•
8 Messages
12 years ago
Hi. I have a Linksys RV016 behind the RT and followed the very helpful instructions in post 2. My RG Unit is the defaullt IP: 192.168.1.254
I changed my router's IP to 10.10.1.1 and set it to DHCP IPs in the 10.10.1.10-50 range
Is this OK? or is it better to use the 192.168.2.X range?
Everything is working as I have it. I'm just wondering if one network range is better than the other...
thx.
0
0
SomeJoe7777
Expert
•
9.4K Messages
12 years ago
192.168.0.0/16
172.16.0.0/16
10.0.0.0/8
0