How to use my ASUS router AC66 with provided BGW320-500

Could you anybody explain very in detail (if possible, with screenshot) how to set-up ASUS router in using BGW320-500?

I tried the belows, but all is not working. Especially, I cannot find anyway to disable the wifi of BGW320-500 ;

https://superuser.com/questions/982901/cascaded-router-network-addresses

https://forums.att.com/conversations/att-fiber-account/can-i-use-my-own-router-and-modem-with-att-fiber/5df019d7bad5f2f606d6906d

https://forums.att.com/conversations/att-fiber-equipment/how-to-disable-wireless-on-bgw320/5f78b4c172a09d3f528cb1c7

https://forums.att.com/conversations/att-internet-equipment/problem-installing-own-router-behind-att-gateway-using-ip-passthrough/5ed99d02c17a0638f39c2cf2

https://forums.att.com/conversations/att-fiber-equipment/set-up-2-asus-wifi-routers-off-att-320500-router/5fb528a0a5ee3f632fafa18b

Responses

JefferMC

ACE - Expert

•

35.8K Messages

3 years ago

Disabling the Wi-Fi is probably the single simplest part of the whole operation.

0

0

lightsail

New Member

•

3 Messages

3 years ago

Could you let me know the way to disabling the wifi?

0

0

JefferMC

ACE - Expert

•

35.8K Messages

3 years ago

Sure.

Connect to the BGW320's internal web page.
Click on the Home Network tab
Click on the Wi-Fi sub-tab
Under Home SSID, change Home SSID Enable to Off.
Under Guest SSID, ensure Guest SSID Enable is Off.

0

0

lightsail

New Member

•

3 Messages

3 years ago

Thanks,

Also, could you show me the set-up for ASUS and BGW320-500 as well?

0

0

JefferMC

ACE - Expert

•

35.8K Messages

3 years ago

Here is a good write up by AT&T:

https://forums.att.com/conversations/att-internet-equipment/bridgemode-vs-ip-passthrough-setup-information/5defbfffbad5f2f606ad5ed2#M29310

There's really nothing much to do on the ASUS, other than you should change the LAN IP so that it's using a different range than the Gateway.

Change it to 192.168.2.1 or 192.168.3.1 or something and hit apply. I think that will automatically change the DHCP range on the next (DHCP Server) tab. If not, fix the IP Pool Starting and End Addresses to be on the same Subnet.

(edited)

0

0