Contributor
•
1 Message
AT&T 3G MicroCell Causes Interference
Friends,
YES. AT&T 3G MicroCell not only causes interference to wi-fi, but it also causes interference with your regular chordless phones. So keep the MicroCell at least one foot away from any of the following devices that works based on wireless transmissions: Chordless phone base-unit, Wireless router, Airport, etc., The documentation of 3G MicroCell talks only about wi-fi devices and about other devices.
I want to post this in the interenet everywhere possible, so that it comes up in the internet search of anyone struggling to resolve a problem due to AT&T 3G MicroCell. In fact, to resolve this problem, A&T blamed on Vonage and AT&T wanted me to sign-up into a ConnecTech service program paying $15 per month for 12 months. Watchout !!!
Cheers to everyone !
OttoPylot
ACE - Expert
•
24.3K Messages
11 years ago
Sounds like a troll to me. If you follow the install instructions, 18" from a window with an unobstructed view of the sky and at least 2' away from a WiFi device (router), it's fine. We have 4, 2.4Ghz phones on a landline connection and have never had an issue. If fact, most of our WiFi devices use the 2.4Ghz frequency and have NEVER had an issue. Vonage is VOIP, the MicroCell is not. Our Airport Extreme Base Station has never had an issue with the MicroCell as well. Sounds like a setup issue on your end.
0
Budule
Teacher
•
24 Messages
11 years ago
hmmm.....my microcell , wireless router AND cordless phone base are all sitting on the same desk right next to each other with no problems.......
0
0
OttoPylot
ACE - Expert
•
24.3K Messages
11 years ago
Thanks.
0
0
mendicants
Contributor
•
2 Messages
10 years ago
0
0
OttoPylot
ACE - Expert
•
24.3K Messages
10 years ago
I have lots of experience, as do others, with the MicroCell (read the Tech Guide) and yes, while I do agree that the MicroCell has issues, technical and support-wise, so does Verizon's and femtocells in general, it still works quite well for most people. And the ones that it doesn't, we've been able to help quite a few here.There are lots of router configurations, home setups, phones that don't play nice, etc that compounds the problems. Personally I wish AT&T provided decent in-home coverage through-out all of their service areas so we woudn't need femtocells, but they don't. If you have something positive to say or help for those who are having connection issues please contribute. If not, carrying on how bad the MicroCell is doesn't help anyone and you should just move on to your next target.
0
0
Avedis53
Professor
•
2.2K Messages
10 years ago
Geez Otto, where in the world did you find these two? There is no way a Mcell can reset router connections or anything else he mentioned. Uninformed and flaming away with bogus information....Goodness!
If you don't have a problem that you want help with, save your energy and don't post here. You aren't helping anyone with your disjointed diatribes.
0
0
OttoPylot
ACE - Expert
•
24.3K Messages
10 years ago
Interesting that both of them registered today. Hmm.....
0
0
xtremdude
Contributor
•
3 Messages
10 years ago
I have a question that has not been able to be remedied by AT&T or ADT. I was using my Microcell without incident, love it and wish I could still use it.
The Problem.
I had an ADT system installed in the house. We (ADT Tech) ran some tests after we kept getting errors in the ADT System, system would start beeping, not alarming, just continuous beeping due to loss of radio signal.
We found out that the Microcell was acting as a jammer against the ADT Radio signal. The work around was that we just unplugged the Microcell at night so the system wouldn't go off.
We have not found away around both working in unison. We now stopped using the Microcell. But the reception is very bad where we just moved to and I would like to start using it again.
Any thoughts?? Besides hardwiring in the ADT System which would be great, but requires a phone line which is an additional cost and all this stuff should just work together.
Thanks for your time.
Kurt
0
0
Avedis53
Professor
•
2.2K Messages
10 years ago
My understanding of ADT's Cellguard wireless system is that it uses cellphone frequencies to communicate with their backend monitoring systems. Since the Mcell uses the 850 MHz or 1900 MHz frequencies to communicate with local cell towers and your cellphones, it would certainly interfere with your ADT wireless system, which you have already seen.
You'll either have to go to a wired security system to keep the Mcell or keep the wireless security system and use something else besides the Mcell. Cell signal boosters such as Cel-Fi or ones from Wilson Electronics might work with the ADT system but I can't say for sure.
0
0
OttoPylot
ACE - Expert
•
24.3K Messages
10 years ago
Thanks Avedis. I had not heard of this before but it does make perfect sense. I think your suggestions are the only viable options for the poster.
0
0