I tried to access my router and sign in with the access code printed on the label. The router will not accept the access code. Anyone out there with a solution? It's a new router.

Can anyone please give me a link or give me recent up to date instructions on how this is done. The Google machine brings Att forums that are out dated and do not work.I would much appreciate.

I'm new to U-Verse Internet, so bear with me.  Previously I had both a modem and a separate router.My Question, is the AT&T U-Verse 5031NV Wifi Gateway, both a modem and router, combined?Or do I need a separate router, as well?

Can you purchase your own modem or do you have to lease from ATT?

The wifi signal has become increasingly bad in our setup (devices and wifi tv boxes) and I am thinking about moving to my own router to handle everything with a better signal.  I am well aware that placement, walls, and so on affect the signal so please do not recommend changing the current location

The router includes a USB connector which allows a USB hard drive to be connected and recognized as a NAT drive. When I connect my drive nothing happens. The drive spins on power-up but the router does not indicate a USB connection and the device is not visible in any network search. The router's ut

I recently ordered a static IP address and all I have is the address itself. I need to know the subnet mask and gateway address too. I would like to know if I can put my equipment on the other side of a router as well and how I would setup the subnet for that. I can't even speak to a person at t

I get charged $7 every month for "internet equipment." Can I buy something on my own that can be used instead of paying this fee every month? What do I need to buy?

Just signed up for the introductory 12-month offer to AT&T Fiber. A couple of quick questions. There is no way to Ethernet wire directly from the ONT Terminal to my own third-party router (ASUS RT-AC68U), as the ONT Terminal needs to communicate with an AT&T Device (like the Arris BGW210-700) to man

We moved and subscribed with AT&T for fiber service (500MBps). The modem is currently installed in my office. I have an eero pro router, TPLINK gigabyte switch, and Synology D220+ NAS. Right now, I have the modem running into the switch, which then routes to my PC and the eero. The NAS is connec

I own a AT&T 4290 wifi extender that I bought several years ago. I'm thinking of buying another on Ebay. Can I run two simultaneously? If so can they be connected together with ethernet (like backhaul) or just wifi? I'm at a loss on how strong this thing still runs. I'm getting +/-300 Mps upl

I have ATT Fixed wireless which has port forwarding, pinholes, and DMZ among other things not available in router settings. Is it possible to make the ATT router be modem only / passthrough so I can use my own router?  If yes, how?

I recently moved and now have AT&T fiber service with the BGW320 modem/router. Since upgrading I can't stream using the Airplay protocol. My computer and phone are on the 5ghz network, while one of the Airplay devices is on 2.4ghz and the other on 5ghz. The devices are connected and I can us

Gateway BGW210, currently from AT@T, I. would like to know if, I, can purchase a gateway instead of using AT@T gateway and being charge a $10.00 a month fee.

Hello, I currently the the AT&T provided Model: Humax BGW320-500 gateway for fiber. I have purchased AT&T extenders, but still get drops and/or low speeds on some devices. I believe it is because too many devices are connecting to the gateway. I would like to purchase my own modem that isn't

When I log into my gateway I can devices connected to the 2.4GHz but nothing is connected to the 5GHz. I have brought multiple devices (iphones, ipads, laptops) within range and direct line of sight with the gateway but nothing registers as being on the faster frequency. The Wifi radio status shows

Can you have two different routers in 1 house but has the same carrier For example: in the living room there is 1 Uverse 5268AC router and another same router in my brother's bedroom.

I am trying to bridge a Linksys router to my NVG589 router to see if it improves the slow performance of the NVG589, but when prompted for the Device Access Code, I put in the code that is clearly written on the side of the router, and it says "Device Access Code Incorrect".

Gaming on a Hotspot Open NAT Type - How to Open UPnP If you are here, you are wondering how to open the NAT (network address translation) on your Hotspot. Unfortunately, most mobile Hotspots do not have the ability to open the NAT due to software limitations.   Not to worry, we have a sol

I am using a BGW320-505 (software v 2.12.4). I'm afraid that what I'm describingis a bug in that software, but any help would be great! I have a host "mythical" allocated LAN address 192.168.1.111 listening for sshconnections on its port 8176.  This host sends its hostname to the router when