Contributor
•
3 Messages
Vizio Soundbar Compatibility with U-Verse Remote Control
I have the Vizio VSB210WS Sound Bar and I was hoping to sync the remotes, so I don't have to use the Vizio remote just for the volume, but I haven't been able to do so.
Has anyone else had success doing this with a Vizio soundbar????
sammitch
Contributor
•
1 Message
12 years ago
We've tried all of the codes in this post so far and can't get the Vizio MODEL NUMBER: VSB210WS to power on or off.
We did however get the volume control to work by setting the default audio level from the U-verse box by programming ATT key. Anyone have an additional key?
0
0
aviewer
Expert
•
10.1K Messages
12 years ago
If you have the STB varying the volume when in the att mode, that is a good work around when watching U-verse, but is no good for watching DVD or OTA.
If you need more flexibility get a Logitech Harmony model 300 from Radio Shack for $30 or search for deals.
If you want different activities, Like watch TV with TV sound vs watch TV with sound bar sound vs watch DVD etc. then go for a model 650n or higher. Just saw the 650 at costco for $60.
0
0
Livesublime
Teacher
•
2 Messages
12 years ago
After google'ing and following all of these steps - TO NO AVAIL - I finally figured it out!
Here is what I did, step by step, and it worked... I almost fell to the floor in disbelief 🙂 🙂
Then, after you get the remote to recognize the sound bar you will then have to program the remote to use the AUX (Soundbar) as the main volume control for all of your devises (TV, DVD, Etc.). Here is how I did that:
* Step 1: Press and hold down the "AT&T" button on the U-verse remote. As you are doing this, press the "OK" button. (Yes, the OK button, NOT the Enter button!) Release both buttons at the same time. The remote is ready when the mode buttons flash twice.
* Step 2: Press 955 within 10 seconds. The AT&T mode button will flash twice to indicate that the code has been recognized.
* Step 3: Press the "AUX" button. Watch for the mode button to flash three times confirming volume control assignment.
That's it! Super excited to finally have ONE remote 🙂 🙂 🙂 🙂 🙂
0
Bobuis14
Contributor
•
1 Message
12 years ago
0
0
honokai
Contributor
•
1 Message
12 years ago
Thanks, Livesublime! Your solution worked perfectly for me.
0
0
spd2demun
Expert
•
24.3K Messages
12 years ago
Care to share that with the rest of us?
0
0
Anonymous
New Member
•
25.7K Messages
12 years ago
I found a way to make a third party remote work with the Vizio, and that was by purchasing a Logitech Harmony 300 remote.
0
0
spd2demun
Expert
•
24.3K Messages
12 years ago
Thanks for the info. If you see them again, do an abuse report to the mods.
0
0
saga192003
Contributor
•
1 Message
12 years ago
0
0
Anonymous
New Member
•
25.7K Messages
12 years ago
0
0