AT&T Fiber Equipment

I received my BGW320 router yesterday. The power cord is plugged into the socket and the SFP cord is connected to the fiber outlet in the wall. The router box goes through the process of turning white, then green to indicate that it's setting up but it never turns to a solid green...just keeps flash

I just signed up for AT&T fiber, switching from Charter Spectrum.  It's generally been going well, except for one thing.  I use zoom nearly constantly throughout the day (work from home) and, since switching to AT&T, I get freezes 3-4 times per hour.    I started running

When the fiber side of the modem goes down due to a cable issue or hardware failure outside the premises, the BGW320-505 modem hijacks DNS and gives the false impression to my router that the network is still up. The modem resolves any character string whatsoever to its own local IP address and resp

I have the AT&T 2.5 Fiber plan with a modem BG320-500. Can I connect the BG320 device with my Ubiquiti gateway, UDM-SE device?  The port choices on the BG320 are: the 1- red  ONT Port,  or 2- 10 GB rated SFP/SFP+ fiber port, or 3- Port# 4 5GB Ethernet port .  The port choice

My primary Internet connection is with the BGW320-505 setup in Pass-through mode connected to my Unifi Dream Machine Pro. (UDMP) My secondary Internet connection is with Xfinity cable modem.  This is a great secondary option for me as it only costs me $20 a month.  The issue is, I've ha

Hi! We were looking to pass our WAN IP to our Palo Alto via our Meraki switch.We seem to be having issues getting all the correct settings to configure it into Passthrough/Bridge but what are all the settings I should look for when switching over to my WAN IP on my BGW320-500?

Hey everyone, As a long-time customer of AT&T, I've been facing some serious frustrations lately that I felt compelled to share. Over the past few months, I've been experiencing internet issues, with slowdowns and frequent failures. After enduring this for a while, I finally reached out to AT&am

I'm trying to set up a Hurricane Electric IPv6 tunnel using an OPNsense system behind a BGW210-700 RG, but it turns out that despite disabling the packet filter and pretty much every other firewall option in the RG, it drops all incoming 6in4 (IP protocol 41) packets. The logs list the reason as "U

Hello, I noticed a missing cover on 10" round utility box behind my house. This is for the broadband cable, and could be a hazard for kids that like to play back there. How do we get AT&T to replace it?

Recently purchased a newly built home and have the att fiber box in my front yard but my address is not showing up on the website when I search it. Luckily a technician was in the area working on someone else's house so I stopped him to ask and he said that internet can definitely be installed to my