01-30-2012 5:45 PM
My Microcell worked for almost a year and half. About 1.5 months ago it stopped working and I haven't been able to fix it.
It is plugged directly into a modem/router, and sitting next to floor-to-ceiling windows.
The power light is solid, the ethernet light is off, and the GPS and 3G lights blink. I've spent hours on the phone with AT&T customer service several times and they've been useless (grrr). I've rebooted everything a million times. I checked the ethernet cable and it works fine with other devices.
My only option, unless anyone has any other ideas, is to buy a new Microcell and see if it works. I'm beyond the warranty period, unfortunately, so I can't get mine replaced.
I'd love to hear from anyone who has had a similar problem and managed to get it fixed.
I live in NYC, if it matters.
05-28-2012 6:42 PM
Hi there...i have the same issue. Can you explain how to do that? I use an Apple Airport Router if that helps.
05-29-2012 8:28 AM
With my AEBS (Apple Extreme Base Station) I set the MicroCell up using port forwarding to a static IP address for the MicroCell. The MicroCell is connected to the AEBS via ethernet which is the nominal setup procedure (not connected to the DSL "modem" which is called priority setup). This has worked very well for a long time, even after multiple power outages and updates by AT&T. If the ethernet light is off, there is no connection to AT&T which may be a modem issue, an ISP issue, or your MicroCell.
I am not an AT&T employee.
06-16-2012 12:19 AM
Check the power supply (cord) for the power rating. I got mine secondhand, and I don't know if the cord I got was the original, but when I used a different one with a larger amperage rating it worked. See my story here: http://forums.wireless.att.com/t5/3G-MicroCell/SOLID-GREEN/td-p/3232809
Visit these related resourcesView U-verse Troubleshooting!