12-09-2011 6:27 PM
I just got a new 37 inch Panasonic Viera (TC-L37U3) and I am trying to connect it with an HDMI cable. When the HDMI cable is the only cable connected to the TV, I get no signal. The box is good, I had the ATT phone support check the box. The HD light comes on when the box is connected with the HDMI cable. I have follwed all of Panasonic's manaual and over the phone support to get the TV to get the signal, they are stumped I am too.Anybody have any experience with these TVs? Thanks.
Solved! Go to Solution.
12-09-2011 6:28 PM
It could be that the hdmi cable is bad. I suggest you press the input button on the tv to make sure you have selected the correct hdmi input.
12-09-2011 6:39 PM
Do you have another HDMI cable you can use as an installer I have never run into a Panasonic Uverse issue with HDMI with the exception of a bad cable thats why we test
the cable prior to instalation. Also plug it in another HDMI port on the TV just to rule out a bad port and if all else fails use the cable to try a different device such as a Blu-Ray player or laptop with HDMI out.
12-09-2011 6:44 PM
12-10-2011 8:37 AM
I did reboot the box. I did go exchange the cable for new one. Same results.
I am connecting tot the HDMI 1 port on the TV and have tried every start up connection and port label Panasonic offers (Antenna, Cable, Not used, etc.) nothing has worked.
12-10-2011 8:48 AM - edited 12-10-2011 8:57 AM
Did you use the input button to select HDMI1?
Check the viera button to be sure vierra link is off.
Make sure you are not in photo mode.
Can you get any over the air channels? When you press menu on the TV remote dose the menu display?
12-10-2011 11:36 AM
12-11-2011 5:57 AM
03-04-2017 6:15 PM