09-13-2014 10:21 PM
05-20-2011 12:49 AM
Everything in the Vizio guide tells you to start with a one but the uverse guide says you can only do that with a TV. The 4060 from HTI didn't work either. Any other id's?
05-20-2011 4:08 AM
You can reasign DVD or AUX as TV -
Push att/ok all mode keys flash
enter 944 all mode keys flash
press TV key
Press aux or DVD three flashes for success
Try your TV codes on this key tpo control sound bar
08-20-2011 5:11 PM
The idea sounded great but once I copied the TV control to AUX and tried reprogramming the TV button, none of the Vizio codes for the Uverse remote worked the sound bar. I'm going to check with Vizio and the Uverse remote manufacurer Cisco.
Anyone happen to stuble across a code that works? It'd be nice to use one remote than to continue using the remote that came with the soundbar.
09-14-2014 6:02 AM
You could also put the Sound Bar on the DVD button and program the remote to send volume controls using the DVR command set. That way your TV button would set you up to control your TV for buttons like TV/VIDEO and MENU instead of having to use the DVR button, and everything else would still work. Right?
09-15-2014 7:13 AM - edited 09-15-2014 9:26 AM
Hadrian98 - Can you find a code that turns the Vizio soundbar on/off while you are searching for the code? That is what alerts you that you have found a correct code. To actually make it work, you need a couple more steps.
You need to program code 955 to change the default from ALWAYS controlling the TV to another option.
You need to add the Vizio to the power control list ( att/ok - 977 - list all your modes - enter).
Some sound bars can be programmed to accept other IR to control them. That is, apply the TV volume IR to the Vizio to make it seamless.
If you cannot get a compatiblity - You can program the u-verse remote to follow the mode selection, instead of always controling the TV (att/ok - 955 - enter). Then, while in att mode (i.e. normal watching the volume button will control the STB).
Set the STB volume down to 15.
Set the TV volume to a comfortable level.
Set the Vizio volume to a comfortable level.
While watching, in att mode, the volume control will vary what you hear from either the TV or the VIzio. Whichever audio is on.
Here are some other remotes that support your setup -
Logitech Harmony 350 & Smart Control (awesome - https://forums.att.com/t5/Using-your-U-verse-TV-Re
09-16-2014 9:48 AM
09-16-2014 9:52 AM
09-16-2014 9:55 AM
09-16-2014 12:21 PM - edited 09-17-2014 5:34 AM
OK, you are saying that some Vizio sound bars work with IR intended for TVs.
The problem is a "standard" U-verse remote edits the codes & only allows TV codes on the one TV button. The AUX & DVD buttons edit for different ranges of codes.
To apply TV codes to AUX or DVD button - first change the button to be another TV button as follows - att/OK (together) - 944 - TV - (AUX or DVD). The AUX or DVD button will now accept TV codes instead of AUX or DVD.
I do not know how this affects 955 for always assigning volume control or 977 for power all devices (is it TV or AUX/DVD & can you do it). Worst case is have it follow the mode button, which may be best anyway.
I once had three TVs on one remote using the follow the mode for both volume and power.
10-03-2014 8:42 AM
The problem with this "solution" is it's hardly a solution for most people. If all you have is a TV with uverse and a soundbar, it works fine. If, like many people probably have, you also have a DVD player hooked up to the TV that happens to be the same brand as the TV (in my case, Samsung) this solution solves nothing.
10-03-2014 12:04 PM - edited 10-03-2014 2:04 PM
trav323 - Please be more specific about what you want to do & why this does not solve your problem.
If you have a Vizio sound bar that must be programmed as a TV, you do that to the AUX button as described. And, you have the DVD programmed to the DVD button.
When watching u-verse you have complete control of the the U-verse box & audio volume while in the ATT mode.
While watching a DVD, apply the DVD mode to control play & either the TV or AUX to vary sound.
Yes, the volume button does not work in the DVD mode. But, you have to choose between TV & Sound Bar.
If you had a remote that has activities, you would set one activity for TV sound & another for Soundbar sound. You would choose which device the volume button applies to at power up by whhich activity you activate.
With the U-verse remote the choice is made when it is time to change the volume, you push the mode button to assign the device to the volume button (or the volume button to the device).