07-12-2013 6:23 AM
My set up has two uverse receivers in the same closet. Both set up with RF remotes BUT feeding different TV's. I have tried everything I know to get the two remotes to work independantly, but cannot. I have done the rf synch with both powered on and again wto each with power off to the other. Did the tv synch things seperately as well. Is there a way to get each RF control only a single box? Many thanks for the help.......
Solved! Go to Solution.
07-12-2013 6:42 AM
07-12-2013 6:54 AM
Sorry if this is s stupid question but....
the two boxes are in the same closet - right nowfacing each other. If i put them on different shelves in the same closet will that work? Stacked, maybe 14" apart?
07-12-2013 6:56 AM
rereading now and maybe coffee just kicked in. Should i just block the IR on each? Duck tape or something?
07-12-2013 7:19 AM - edited 07-12-2013 7:20 AM
The dongle provides the IR commands for the STB from the RF remote. (The Dongle only gets power from the USB port, it doesn't use the USB port to control the STB.) Each dongle's output can be reflected to the other STB that you don't intend to control. Take some steps to shield the output of each dongle from getting to the other STB.
07-12-2013 7:26 AM - edited 07-12-2013 7:53 AM
evandorman - No, I believe those measures are not enough, I have an RF remote for one TV and an IR remote for another - see my avatar.
When I had the RF hidden under the cabinet a slight crack in the partition was enough to let the IR through. Tape on the IR receiver may even improve its ability to see the other dongle.
One person reported the dongle controlling the IR STB two rooms away.
The blanket was a joke, but you need that level of isolation. Make a muzzle of thin cardboard to enclose the dongle and the front of the STB & tape it to the STB. Probably one is enough. But, I would do both STBs.
An alternative would be to put one STB behind its TV in the room. This will only work if you have no IR STBs that are visible from that room. You could actually use an IR remote. Which is what I do.
07-12-2013 7:57 AM
OK.. i think i get it now. Just to make sure.. i can leave BOTH boxes in the same closet but need to isolate each one of them - the entire STB with the dongle. So i can enclose each - or maybe just one - in a cardboard box, tape it up tight and should be good to go? Sounds goofy, but why not...
07-12-2013 8:16 AM
Having service trouble? There is an app for that! Use our troubleshooting tool or text myATT to 8758 to download the app. It is much faster than posting on our forums. You will also find some helpful articles below.
© 2016 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!