02-06-2013 10:22 AM
Ever since I did a self-install of my 2250 DVR a month ago, which replaced a 1225, I've been having problems with 2 of the silver standard remotes (RC153). Often the remotes won't let me press all 4 number buttons for going to a HD channel and will only enter 3 which sends me to a channel I don't want. I've tried doing this faster and slower with no improvement. Also sometimes it will send it directly to a channel when just pressing the 1st digit of a number. I had no problems in using these older silver remotes with the 1225 DVR or a 1200 STB.
I also have a new black standard remote (S10-S3) and only once was I able to get all 4 mode lights to flash twice when pressing the "TV" and "Enter" buttons together for 1 second. Then in pressing the Scan>FF button to search for a code my Sony KDS60A3000 TV shut off but this was not the correct code since other functions wouldn't work. It should be noted the black remote will work the guide/channel changes very fast but won't turn the TV/DVR off together since there isn't a TV code entered/saved.
Another problem with this black remote is I can't get the 4 mode keys to flash at all when pressing "TV" and "OK" together for entering in a code manually. I'd rather not go this route anyhow since hate to have the lamp kicking on/off as I enter 20 different codes for Sony TV's. Sure wish I would have written down the code for my Sony TV somewhere, just in case the mode buttons flashed, but I didn't. Maybe this is because I programmed it automatically, never did know the code, and can't remember how I did it 4+ years ago.
I've read about a bunch of problems with the 2250 DVR but mine has worked flawlessly (knock on wood) except for these remote problems which are driving me nuts. My Sony DLP doesn't seem to cause any interference problems with the remote. I can see the RG through the TV stand but don't think it, along with the WAP, would cause these remote problems.
I was hoping my 2250 DVR was new since it was shipped but maybe it was having remote problems before and it's rebuilt? Can't tell and hate to have it replaced for another one since it's working so well.
Appreciate any help/input on solving these remote problems. Thanks!
Solved! Go to Solution.
02-06-2013 11:54 AM
02-06-2013 10:23 PM
I think you "hit it on the head" aviewer about the IR eye on the 2250 being too sensitive. I folded/hung a paper towel over the front of the receiver and it slowed/filtered the silver remotes IR signal down enough where I was able to enter channel numbers in at my own pace w/o it changing channels prematurely.
The black S10-S3 remote is brand new and nice of U-verse to now include new Duracell batteries. Don't know why but most often when pressing the "TV" + "Enter" keys or "TV" + "OK" keys the 4 mode keys flash wouldn't flash even when shooting through the paper towel. But I must have caught it at just the right time and auto programmed the TV code in where all the functions now work. Glad it found the code quickly because you don't want to be turning a super hot DLP lamp on/off quick unless you want to blow it or shorten the life span.
So right now I have a piece of scotch tape folded 3 time with another small piece of tape holding it onto the front of the 2250 just left of the green link light. Odd that I could see the actual IR eye on my older 1225, and on my 1200 STB's, when holding a bright flashlight closely on the face but not this one. The front plastic is too dark but maybe not dark/black enough?
Regardless, all of my remotes are now working fine and thanks for your help aviewer. I'll need to recheck the remotes during the daylight and may clean the tape job up just a little.
02-07-2013 4:12 AM
Getting U-verse? Great! Welcome to the family! Check out our articles below regarding your Install, Your Appointment, Bill, and other features!
© 2017 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!