Explore & discover

Helpful Links

My remote volume still controls the receiver volume....

Highlighted
Teacher

My remote volume still controls the receiver volume....

My remote volume still controls the receiver volume even after I successfully program my remote using the tv mode.  How do I program the remote so that do not have to switch the remote modes back and forth from "att" and "tv"?

42,326 Views
Message 1 of 9
ACE - Expert
Solution
Accepted by Anonymous
Accepted by Anonymous
‎09-30-2015 1:39 AM

Re: My remote volume still controls the receiver volume....

If you want the TV volume to be controlled by the volume keys, regardless of what mode the remote is in, do this:

  1. Press and hold the AT&T button on the remote.
  2. Press the OK button and release it and the AT&T button at the same time. All the universal lights will flash twice.
  3. Type 955. The AT&T button will flash twice.
  4. Press the TV button. The TV button will flash twice.
  5. Press the AT&T button
Award for Community Excellence 2019 Achiever*
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Tags (1)
Message 2 of 9
Teacher

Re: My remote volume still controls the receiver volume....

Thanks, I followed your instructions step by step and it worked perfectly!  Thanks! Smiley Happy

Message 3 of 9
Contributor

Re: My remote volume still controls the receiver volume....

I did the same fix, but in reverse order. I wanted my volume button on the remote to control the home theater receiver volume. It worked flawlessly...

 

thanks much,

Ken

 

Message 4 of 9
Mentor

Re: My remote volume still controls the receiver volume....

Ken, can you explain to me what you did to get the uverse remote to control the AVR volume?
Message 5 of 9
ACE - Expert

Re: My remote volume still controls the receiver volume....

In my instructions a few posts up, you are instructed to push the TV button at step 4.  Instead of pushing TV, push one of the other three buttons: This will make the remote always send the volume control for that device. 

Award for Community Excellence 2019 Achiever*
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 6 of 9
Tutor

Re: My remote volume still controls the receiver volume....

Can you advise how to do this with the S30 remote control as there is no "at&t" button?? I've seen the posts to set volume to the receiver, tv, or surround sound; but can't find how to reprogram such as you've posted with my remote. Merely trying to set volume thru my tv or SS, it does NOT work! It's a new remote & it's always worked until today. Help would be appreciated!
Message 7 of 9
Contributor

Re: My remote volume still controls the receiver volume....

This didn't work for me. Here's a link to AT&T's instructions. You also have to use the ENTER key in one of the steps.

Message 8 of 9
Contributor

Re: My remote volume still controls the receiver volume....

This didn't work for me. Attached is a link to AT&T's instructions. You also have to use the ENTER key in one of the steps. https://www.att.com/u-verse-welcome/m/en/tv/remotes/remote-settings.html

Message 9 of 9
Share this topic
Share this topic
Additional Support