Guide on how to Program AT&T Remote Control to your TV

[RL6262]

Here's a guide on how to Program the AT&T Universal Remote Control to your TV.

Click Here for the Link. It also includes the codes for different brands of TV. If the guide help you please put a FeedBack or Rate me on the guide website.

Thanks

Previous Sup - AT&T Uverse

RL6262

[mstaylor2511]

You dont happen to know any additional codes for Bose Cinemate GS II by chance? Nothing seems to work. FINALLY was able to get the Samsung BluRay set up. A code not listed by Uverse. SBR Model BD-D6500 @ code 2483 thanks to a post I came across. 

[aviewer]

mstaylor2511 -
Google U-verse remote code for bose & you will get many codes to try. You did see my earlier post that you need to change the volume setting??

[mstaylor2511]

yup. tried that. even reset the uverse back to factory settings and started over. no go. I did get several codes yesterday from BOSE to try on the BOSE remote to set up the uverse box (mfg. by Cisco). Stop gap measure, I know but worth a try. Thanks

[hawkmothmvp]

I have not been able to enter any codes for the Samsung HDTV. The S10-S1 always comes back with the invalid response when entering codes. This is a new TV and I had previously entered the codes for a Sharp TV. Do I need to clear those codes before entering a new code or is there something else that I am missing?

[aviewer]

hawkmothmvp - You do not need to remove one code to add another. You should not have to, but you could try a factory dfault reset, just to clear the remote.

As the first step - You are doing the TV & OK buttons together?? Some settings use att/OK, but devices use the correct mode button. If you want to use other mode buttons for TV, there is a mode change first.

[hawkmothmvp]

I have been pressing the TV & OK buttons. I get the double flash to signify it is in programming mode. It's just when I enter any code, I get the long light signifying that it was an invalid code. I have multiple remotes and they all do the same thing. Are there new codes? Should I get a new remote?

[aviewer]

hawkmothmvp - There do seem to be different code for the two remotes. Is yours the all black or grey face?? & I will look up the samsung codes on the orig doc for the remote.

[hawkmothmvp]

I have the black remote

[aviewer]

hawkmothmvp - Samsung codes - 1006 1026 1041 - 43 1046 1047 1049 1081 - 85 1100 1136 - 39 1171 1176 1189 1214 1223 1311 1314 1345 1359 1364 1366 1370 1375 1442 1578

I had a Samsung that I could not find a code for & had to use the search method. If you do not find a setting with the TV off try it with the TV on. Note that the find method uses the enter button instead of the OK button.

Factory reset is att/ok( together) - 900

[gs1234]

My TV is Samsung UN78KU7500 and my remote is S10-S2. I tried all Samsung codes and scanning too but had no luck. What's the programming code for this TV?