Tutor
•
1 Message
Guide on how to Program AT&T Remote Control to your TV
Here's a guide on how to Program the AT&T Universal Remote Control to your TV.
Click Here for the Link. It also includes the codes for different brands of TV. If the guide help you please put a FeedBack or Rate me on the guide website.
Thanks
Previous Sup - AT&T Uverse
RL6262
Accepted Solution
Official Solution
jamileh
Former Community Manager
•
5.2K Messages
11 years ago
Here is an article that discusses programming your remote control: http://www.att.com/esupport/article.html#!/u-verse-tv/KM1009898
If still having problems, check out this post here.
0
0
marlenelee
Contributor
•
1 Message
13 years ago
Samsung lists about 20 factory codes. How can you tell which one matches the TV you have?
0
0
texasguy37
Expert
•
14.5K Messages
13 years ago
You need to try the codes to see which one works for your TV.
0
0
spd2demun
Expert
•
24.3K Messages
13 years ago
You can also try the App on your TV:
Menu > Help > System Setup > Program Your UV Remote
0
0
vanumom
Tutor
•
1 Message
13 years ago
I cannot find any codes for my TV - it is a Dynex. My U-Verse remote will run the channels, but not the power or the volume. What next?
0
Miamilife
Contributor
•
1 Message
13 years ago
I have a Samsung TV and a seperate Samsung Sound bar. How do I program the U-verse remote to turn the TV on and off, but the volume is the sound bar. Don;t see a code for sound bar that I guess I would program under Aux.
0
0
spd2demun
Expert
•
24.3K Messages
13 years ago
Take a look in this post for other codes that might work.
0
0
Estrain85
Tutor
•
2 Messages
13 years ago
The following link has an updated list for the universal black remote that had a different set of codes.
Link
0
Estrain85
Tutor
•
2 Messages
13 years ago
0
0
dyoung78
Contributor
•
1 Message
12 years ago
I have programmed the u-verse to turn my Sony receiver on and off, only one of the codes work. However, it will not adjust the sound through the receiver, it adjusts the volume on the tv. I seem to remember having to do something with the cable remote previously. Please help!
0
0