Chris __________________________________________________________
Please NO SD stretch-o-vision or 480 SD HD Channels Need Help? PMATT Uverse Care(all service problems) ATT Customer Care(billing and all other problems) Your Results May Vary, In My Humble Opinion I Call It Like I See It, Simply a U-verse user, nothing more
@Grummang - Wireless recievers do not connect to the RG. They connect to a WAP. The WAP connects to the RG cat5 & should be at least a meter away from the RG.
No luck. Still flashing "Link" and "Paired" lights on the WAP after all that. I get zero signal from the wireless receiver to the TV set regardless of connection used (HDMI, Composite, coax or RGB) but every light on the receiver is on and solid. even the red "REC" light when nothing is being recorded on the DVR right now.
Accepted Solution
Official Solution
mibrnsurg
Expert
•
20.4K Messages
8 years ago
I'd do a whole house reboot.
Unplug the RG and DVR and STB(s)and any WAP for wireless receiver(s), wait 30 seconds and plug the RG back in.
When that turns all green, then plug the DVR back in and wait until it reboots. Then if there is a WAP, plug it in and let it turn green.
Then plug in the STB(s), wait til it reboots and see if the WAP connects to the STB.
Acronym Guide so you understand all terms: http://www.dslreports.com/faq/17724
Good luck 😉
Chris
__________________________________________________________
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(billing and all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more
0
0
Grummang
Tutor
•
4 Messages
8 years ago
Also, I tried connecting while the receiver was directly in front of the gateway. No luck.
0
0
aviewer
Expert
•
10.1K Messages
8 years ago
@Grummang - Wireless recievers do not connect to the RG. They connect to a WAP. The WAP connects to the RG cat5 & should be at least a meter away from the RG.
0
0
Grummang
Tutor
•
4 Messages
8 years ago
Thanks. I was more making the point that I was in the same room as the RG and WAP.
0
0
Grummang
Tutor
•
4 Messages
8 years ago
Thank you.
0
0
cs9314
Contributor
•
2 Messages
7 years ago
No luck. Still flashing "Link" and "Paired" lights on the WAP after all that. I get zero signal from the wireless receiver to the TV set regardless of connection used (HDMI, Composite, coax or RGB) but every light on the receiver is on and solid. even the red "REC" light when nothing is being recorded on the DVR right now.
0
0