01-03-2010 4:45 PM
I have the Vizio VSB210WS Sound Bar and I was hoping to sync the remotes, so I don't have to use the Vizio remote just for the volume, but I haven't been able to do so.
Has anyone else had success doing this with a Vizio soundbar????
Solved by: Go to Solution.
08-28-2012 11:44 PM
Care to share that with the rest of us?
There is an easier way to program the remote if anyone is still trying to figure it out. I finally got it and am so happy.
08-29-2012 4:43 PM
08-29-2012 10:58 PM
Thanks for the info. If you see them again, do an abuse report to the mods.
They also spammed the Vizio Soundbar forum at avsforum.com. I am guessing that they did a quick search and spammed every forum that mentioned about using a third party remote with the vizio soundbar.
I found a way to make a third party remote work with the Vizio, and that was by purchasing a Logitech Harmony 300 remote.
09-25-2012 2:48 AM
09-26-2012 3:17 PM
11-09-2012 10:48 PM
Which Uverse remote do you have? I have the S10-S3 and a Vizio VSB207 SoundBar and I can't get the auto-search to find the code. I've gone through the sequence twice, attempting to assign the SoundBar control to the AUX button. I went through about 200+ clicks of hte Scan/FF key with no success. Anybody else have any tips?
11-10-2012 3:19 AM
11-17-2012 1:35 PM
11-17-2012 3:13 PM
- edited 02-24-2013 4:25 PM
Oops! Seems like someone else had already posted the directions!
08-12-2013 9:18 AM
SUCCESS !!! - Thanks to Livesublime's suggestion, I have a fully functioning U-Verse RF Remote that works with my VIZIO VSB210WS Sound Bar.
IMPORTANT - BE PATIEINT (and persistent) when using the SCAN/FF key to advance through the codes (Step 4 in the Livesublime suggestions) - I pressed the button around 200 times until it found the right code and shut off the power.
Very excited to have one remote that works with all the TV components.
11-04-2013 6:10 PM
Thank you so much!! These instructions worked flawlessly for my Sony Sound Bar (and I'm certain it will work with any other Sound Bars).
One quick note: if you happen to pass the code that worked while pressing "SCAN->\FF", I pressed "REW\<-SCAN" to go back a couple of codes and found the one that did work for turning off my sound bar. After which point, you press the "Power" button along with the Volume buttons and "Mute" button to ensure it works well with your sound bar.
I had to press the "SCAN->\FF" for a long while before reaching the proper code for Sony.
Thanks again for posting the solution to my headache of having multiple remotes!
01-19-2014 1:39 PM
When you now start your equipment with the UVerse remote, does it power on the UVerse DVR/receiver, the TV and the sound bar but there is no sound from the TV's speakers but just the sound bar? And the volume buttons on the UVerse remote only control the sound bar volume?
10-29-2014 8:38 PM
11-16-2014 5:58 PM
I have tried the auto search and manually entering the previous codes but I can't get anything to work. I think my model # is s4251w-b4. can anyone help me?
Visit these related resourcesView U-verse Troubleshooting!