05-09-2019 7:03 PM
I have 3 TVs in my residence. 2 of them receive a signal, however, the main TV that's connected to the Pace? IPH 8005 receiver does not receive any signal. I have tried rebooting the gateway as well as the receiver itself a couple of times, but there is still no signal. On the receiver, the green power light is on as well as the blue HD light. The green link light is not on. Any thoughts are much appreciated.
Solved by: Go to Solution.
- edited 05-09-2019 8:24 PM
The green link light is not on
Then I don't think the dvr is connected to the gateway (or at least it thinks it's not connected). Make sure the ethernet cable is plugged into the network port on the dvr and the other end to one of the yellow ethernet ports on the gateway.
By the way it wouldn't hurt to dust off that dvr every once in a while! Who knows how much of that stuff is working its way to the inside of the dvr which can't help with the ventilation.
05-09-2019 8:29 PM
Yep, ethernet cable is plugged into network port of DVR, and on the other end to the yellow ethernet port of the gateway. Still no joy. Could it be that the DVR needs to be replaced?
- edited 05-09-2019 11:09 PM
Try (a) unplug and re-plug the ethernet cable to make sure their RJ45 plugs snap into place in their sockets, (b) try using a different ethernet port in the gateway, (c) try another ethernet cable, (d) replace the dvr, i.e., when in doubt replace!
Note, if you have to replace the dvr you will lose all your recordings but not your scheduling.