10-18-2012 12:16 PM
Here is my problem
Just had Uverse installed. I have a optical connection from the Uverse box to the receiver and I am able to get 5.1. When I turn off the ss I get no volume from the tv. Under the audio setup instructions for the Uverse receiver they want you to select "stereo or surround sound". I selected surround sound and the only sound will come out is if I have the ss on. What I want is to have the sound come out of the tv when the tv is on and have 5.1 when the ss is on.
Solved! Go to Solution.
10-18-2012 12:28 PM - edited 10-18-2012 12:33 PM
Just a few questions:
1. What model is your Uverse STB?
2. How is your TV connected to the STB? (HDMI, Component, etc.)
EDIT: Your most likely solution is to connect two audio cables (the red/white RCA cables) from the back of your UVerse box to the back of your TV but there might be a more elegant solution is why I'm asking the questions.
10-18-2012 12:50 PM
10-19-2012 4:33 AM
What I have is a JVC 5060 receiver. The optical cable comes out of the Uverse receiver and connects to the AV receiver. In the setup for Uverse it asked, "stereo or surround sound" and if you hear sound. When I selected surround sound it disabled the speakers. The only way I can get surround sound is to turn down the volume on the tv, turn on the AV and have PCM sound. I did try to connect red/white audio cable from the Uverse box to the tv and it did not make any difference. I have a Panasonic LED 47" tv.
10-19-2012 4:40 AM - edited 10-19-2012 5:18 AM
gmsuv - What is the model number of the TV?
I looked up the manual for TC-L47WT50 & it showed an HDMI in option to open up the anlog sound input on page 33. It would not copy/paste.
10-19-2012 8:47 AM - edited 10-19-2012 8:53 AM
Looked at the user manual - On page 50 is the option to change the (digital) default sound setting for an HDMI connection to one of the four analog inputs.
Connect the red/white RCA jacks on the STB to theTV input you select/specify in the option setting.
Here is copy/paste of the user manual description -
HDMI 1-4 in Digital/
The default setting is “Digital” for the HDMI connection. (Digital
Select audio input terminal when DVI cable is connected.
(Analog audio input signal)
I am interpreting your problem to be you want to leave the STB on surround and still be able to hear TV audio when the receiver is not on. To use the rereceiver for surround you would have to mute or turn down volume on the TV.
10-19-2012 11:35 AM
Having service trouble? There is an app for that! Use our troubleshooting tool or text myATT to 8758 to download the app on your device.It allows you to troubleshoot in the palm of your hand - quickly and easily!You will also find some helpful articles below.
© 2017 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!