10-23-2012 8:46 AM
I have a Dell XPS One 2710 (all in one) pc that has an HDMI input to its video card. I'd like to be able to use the pc as a TV monitor in addition to its normal computer functionality. But after connecting the Motorola VIP1200 STB's HDMI output to this input I have no video signal. Dell says that this input can accept HDMI signals from devices such as a Blu-ray or DVD player, but that the HDMI data from the STB is not the same and therefore won't work. In their opinion, the only methods for interconnect would be from the STB's composite or component video and audio outputs which, of course, would not be HD.
Has anyone ever been successful with this kind of installation? Is Dell giving me accurate information?
Solved by: Go to Solution.
- edited 10-23-2012 9:46 AM
scoddie - Awhile back there were no HDMI inputs to PCs. Then I did see one. When I first saw your post my first impression was - Are you sure it is not an output?
HDMI is a two way interface. The source device can tell if the target device is capable of recording and turn off the signal.
This means that there should be no difference between the connection to an STB and a DVD player.
However, the U_verse box may be a little more aggressive in turning off the signal.
See if you can get the blue OK screen from the STB when it is asleep.
Also, you might try this splitter - http://www.amazon.com/HDMI-1-Out-Auto-Switch-Cable/dp/B0018DQYQ2/ref=sr_1_4?ie=UTF8&qid=1307119901&s...
Some people have found that it does isolate the two devices. While it is a splitter, you would only connect one input - the STB - to feed the single output connected to the PC.
You are on new ground with this. It will be interesting to see if you can get it to work. In the meantime component should be fine.
One other thing - try different aspect settings on the STB.
U-verse requires the target device support HDCP. Check to see if the Dell does.
I tried to look up your PC manual on the Dell site & found it very unfriendly. Can you give more details on your model or even the link to the manual.
10-23-2012 10:11 AM
10-23-2012 10:19 AM
10-27-2012 3:14 AM
aviewer - unfortunately, the only input oprions to the Dell 2710 are HDMI, TOSLINK and, since it also includes a tuner, coax. I've been able to at least get a picture with sound through the analog coax connection, but, of course, it neither displays full screen nor is it HD.
I did try to connect the STB to the HDMI connector on the Dell marked HDMI Out, just to see if the two HDMI connectors had been swapped internally. Still no go.
I've since talked to Dell again and now their product managers suggest that this type of connection should actually work. They're sending a tech out to check it and possibly replace the MB.
I'll let you know whast happens.
10-27-2012 4:24 AM
10-28-2012 2:11 AM
I have a similar set up and it works. But I am using a ASUS VH238H monitor and it works like a charm. Using HDMI for picture output.
But my only problem is that I dont know how to turn off the receiver completely off. I use my monitor for watching TV in my bedroom and I want to be able to turn off the STB all the way off and NOT put it into standby -- with the blue screen. Havent found a way to do that. I now have to physically walk over to switch off the monitor.
10-29-2012 11:12 AM
Having service trouble? There is an app for that! Use our troubleshooting tool or text myATT to 8758 to download the app on your device.It allows you to troubleshoot in the palm of your hand - quickly and easily!You will also find some helpful articles below.