Multiple TVs per receiver- HELP PLEASE!

Contributor

Multiple TVs per receiver- HELP PLEASE!

Hoping someone can help me.... here is my situation:

 

I currently have U-Verse service on 3 TVs - the main DVR is in my family room and I have HD receivers in my bedroom and living room.  I am in the process of finishing my basement and will have an additional 3 TVs down there.  I will always want to have the same thing on all 3 of those televisions so my question is do I have the ability to put 1 box down there and have the signal go to all 3 TVs??  Or would I need 3 boxes?  I would hate to put 3 boxes down there because 1-  it would be a waste of money and 2- two of the tvs are mounted on the wall and it just isnt convenient to have to put a shelf up for the box.  Again my plan is to always have the same channel on all 3 (I'm going for the sports bar feel) so I'm really hoping there is a way this can be done.... HELP PLEASE!!!

Message 1 of 10 (1,538 Views)
Professor

Re: Multiple TVs per receiver- HELP PLEASE!

You would use a Matrix switch if feeding one HDMI feed to multiple HDMI capable sets.
________________________________________________________________

"Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

Stimpy: So what'll happen?

Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
________________________________________________________________
Message 2 of 10 (1,521 Views)
ACE - Expert
Solution
Accepted by aviewer (ACE - Expert)
‎09-30-2015 1:39 AM

Re: Multiple TVs per receiver- HELP PLEASE!

[ Edited ]

chicagoryan -
Here is a splitter for multiplying the HDMI output. Get the 1x4 version.
http://sewelldirect.com/Sewell-HDMI-1x2-Splitter-v13b.asp?ad_source=GoogleAdWords&ad_medium=PPC&ad_t...

 

Edit - You could connect one TV off the component jacks and use the 1x2 HDMI splitter.

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 3 of 10 (1,519 Views)
ACE - Master

Re: Multiple TVs per receiver- HELP PLEASE!

[ Edited ]

aviewer wrote:

chicagoryan -
Here is a splitter for multiplying the HDMI output. Get the 1x4 version.
http://sewelldirect.com/Sewell-HDMI-1x2-Splitter-v13b.asp?ad_source=GoogleAdWords&ad_medium=PPC&ad_t...

 

Edit - You could connect one TV off the component jacks and use the 1x2 HDMI splitter.


Good answer AV but isn't there some drop off in signal in HDMI over longish distances?

 

chicagoryan: Love the idea of a sports bar type setup!

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 4 of 10 (1,501 Views)
ACE - Expert

Re: Multiple TVs per receiver- HELP PLEASE!

dhascall - Check out the video on the Sewell site. They show TVs connected with a loooong cable.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 5 of 10 (1,491 Views)
Highlighted
ACE - Master

Re: Multiple TVs per receiver- HELP PLEASE!


aviewer wrote:
dhascall - Check out the video on the Sewell site. They show TVs connected with a loooong cable.

Thanks!

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 6 of 10 (1,488 Views)
Contributor

Re: Multiple TVs per receiver- HELP PLEASE!

Thank you for the ideas!  I have never tried multiple cables (HDMI and component) out of the same receiver- I wasnt sure that would work.  That may be the route that I have to go... they will be about 20 feet apart so I will need at least 30 foot cables- I'm hopiong I wont lose quality over that distance.  All 3 of my current receivers are wired and I've never tried one of the wireless receivers.... would that be an option?  Since I don't have one I dont know how they actually sync up with the television- is there a way to connect two TVs to the same wireless receiver??  Just tying to consider all the options!  Thank you all for your help!!

 

 

Message 7 of 10 (1,451 Views)
ACE - Expert

Re: Multiple TVs per receiver- HELP PLEASE!

chicagoryan - Check out the Sewell site distance is not a problem for HDMI with their cables. Watch their video.

I suggested component to save money. You would want the component cable set to be adjacent to the TV & the HDMI cables go to distant TVs.

If you do not mind spending the money the four way HDMI would be better.

Wireless receiver is not an issue, It is wireless only on the network side. The TV side uses the same wires as a wired receiver.

All it sabes is the wire from the RG to the receiver.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 8 of 10 (1,433 Views)
Professor

Re: Multiple TVs per receiver- HELP PLEASE!

Sewell Direct or monoprice.com are going to be your best options for low price. More people are going with monoprice. because they have been great in if you have any issues with an item, and need to return, no questions asked.
________________________________________________________________

"Ren: Now listen, Cadet. I've got a job for you. See this button? Don't touch it! It's the History Eraser button, you fool!

Stimpy: So what'll happen?

Ren: That's just it. We don't know. Maybe something bad, maybe something good. I guess we'll never know, 'cause you're going to guard it. You won't touch it, will you?"
________________________________________________________________
Message 9 of 10 (1,416 Views)
Mentor

Re: Multiple TVs per receiver- HELP PLEASE!

RE: 30 ft. HDMI cables. You should not have any problem. I have a 25 ft. cable wrapped around my living room to be used for iPad/iPhone connections, or watching something from my laptop, and I've never seen any degradation of quality.
Message 10 of 10 (1,290 Views)
Share this topic
Announcements

Having service trouble? There is an app for that! Use our troubleshooting tool or text myATT to 8758 to download the app. It is much faster than posting on our forums. You will also find some helpful articles below.