05-14-2013 6:54 PM - edited 05-14-2013 6:57 PM
Anyone know what the good HPNA power levels are like? What are the things such as 1 > 2? Also, how do I tell which "Station(Receiver?)" is which?
I did an "Extended Test" and got this:
|Station to Station HPNA Performance||PHY Rate (Mbps)||SNR (dB)||Rx Power Level - dB||Packet Error|
|1 > 2||112||41.9||-11.2||0|
|1 > 3||112||41.9||-12.8||0|
|2 > 1||128||40.9||-9.3||0|
|2 > 3||112||41.9||-21.1||0|
|3 > 1||128||40.8||-10.2||0|
|3 > 2||112||41.9||-20.5||0|
Solved! Go to Solution.
05-15-2013 12:16 PM - edited 05-15-2013 12:18 PM
112 and above are proper PHY Rates, the only stat that really matters in HPNA connections.
To figure out which ones are which, about only way is to disconnect a connection and it would show up in the table. That way you would then know which # is which location.
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? 1-800-288-2020, After he gets acct info, press # a bunch of times, get a menu from Mr. Voice recognition
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more
05-15-2013 12:38 PM
05-15-2013 7:50 PM
I'm guessing 1 > 2 means "doohicky 1 going to doohicky 2". It would be a lot clearer to use something like "1 -> 2"
No no, 1 is now greater than 2(Mind blown)!
I originally figured it just meant "From - to -" too.
Having service trouble? There is an app for that! Use our troubleshooting tool or text myATT to 8758 to download the app on your device.It allows you to troubleshoot in the palm of your hand - quickly and easily!You will also find some helpful articles below.