04-29-2014 12:16 PM
DVR will not record scheduled or unscheduled shows. On the recording schedule it shows that they are recording, but they are not. When you go to recorded TV nothing has recorded and the red recording light is not illuminated.
Solved by: Go to Solution.
04-29-2014 12:28 PM
04-29-2014 2:12 PM
Just checking up on your post, I noticed aviewer provided some great suggestions to help with this issue. How is your DVR working right now?
05-18-2014 3:45 PM
Your instructions for last resort was the only thing that finally worked for me. Lost all previous recordings but now seems to work. If this happens again, at least I know now that it was the the main DVR (the one that contains the hard drive). I will have it replaced. if it happens again.
AT&T Uverse = bad equipment+bad service.
- edited 05-18-2014 9:18 PM
Actually there is no need to lose your recordings and do a Disaster Recovery in the future:
If the DVR functions are still not working, try a Non-Destructive Disaster Recovery.
Unplug the power cord of the DVR from the wall or from the back of the box and wait ten seconds. Plug the DVR back in.
When three white dots appear on the screen, unplug the DVR again. Repeat this process two more times.
Plug the DVR back in on the third time and leave in. Three white dots appear followed by a gear with a status bar at the bottom of the screen.
If the Disaster Recovery screen does not appear, repeat the steps above. If the Disaster Recovery screen appears, wait until completion.
If the Non-Destructive Disaster Recovery does not work, follow the steps for a Force Disaster Recovery (above).
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems) or ATT Customer Care (all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more
Visit these related resourcesView U-verse Error Code Help!