12-06-2011 7:07 PM
I had a vip1225 hooked up via HDMI to an Onkyo receiver (HT-S8400 to be specific) and I had problems with audio dropouts on surround. Every few seconds, for a fraction of a second, the audio would drop. It drove me nuts and I tried everything to fix it.. I tried different (new) HDMI cables, and even a different home theater system! In the end, I had to keep it on stereo.
I went over and over this with UVerse support. They kept wanting to send me to the paid support line for help configuring my home theater system and out of four techs I spoke to, none ackowledged hearing anything about audio dropouts over HDMI with surround. In fact, they kept insisting that I plug the HDMI straight to the TV and I kept having to explain my TV is a stereo device, not a surround device so it's not a good test. They also immediately started jumping on the bandwagen saying surround sound is out of scope. I saw a couple of posts about the vip2250 fixing this issue but none of the techs would entertain that idea.
Finally I pled my case to a very nice agent in billing who had to go WAY out of her way to get me a vip2250. Hooked it up and sure enough all audio dropout problems are resolved!
01-03-2012 5:08 PM - edited 01-03-2012 5:10 PM
Hi Ender519, you can put the food you'd like to roast or slow cook under the bottom of the VIP2250.
If I think it's necessary, I'll add tags to postings
01-13-2012 9:40 PM
Thanks to all of you my audio HDMI dropout problem is gone. I just got the Motorola VIP2250 after jumping through some hoops to get it and WOW what a difference. No more HDMI audio dropouts and the 5.1 Dolby Digital is awesome. There is also a 500 GB hard drive instead of the 160 GB in the VIP1216 that I had before. I am using a Marantz AV8003 processor. I had borrowed a Cary Audio Cinema 12 from a friend of mine and had HDMI stutter and audio drop outs with it also when I was using a Motorola VIP 1200. There is also a Motorola VIP2200 (without DVR) but I was told by Tier 2 that they do not have it yet. I suspect that the VIP 2200 will also correct the HDMI dropout problem.
My previous work around had been to use the toslink digital output from my Motorola VIP1216 to my Marantz AV8003 as that did not have any audio dropouts but my preference was to use HDMI audio to my Marantz processor and now I can. Thanks again to all of you.
01-16-2012 12:05 PM
I have vip2250 connected to Plasma Panasonic TV via Onkyo TX-SR674 using HDMI cable. My problem is that when I turn on my TV and audio receiver it takes 10mins before the sound and picture is displayed on the TV. I am not sure how to troubleshoot this issue. On vip2250 green light, yellow light and blue light are ON from the beginning which indicates that everything is normal on the receiver. I was wondering if it has to do with some sort of HDMI handshaking between the devices. I appreciate any help or comments on this issue. Thanks.
01-16-2012 12:52 PM
01-17-2012 1:59 PM
I installed the VIP 2250 Thursday night, took about an hour, the box could not connect to the Uverse system for some reason. Eventually, once I was online with tech support, it worked. Have been having the same rebooting problem every day since then. The box is in an enclosed area, but has all the suggested clearances that were in the instructions. This is my fourth box in less than a year, so I was glad to get the upgrade without having to pay more. It is hooked via HDMI, Can't believe it is overheating, since we only watch it for 4-5 hours a day, and it arbitrairily picks a rebooting time, not necessarily at the longest period of usage. Is this possibly a softwre glitch that might be resolved in the near future? Otherwise, very pleased.
01-17-2012 2:04 PM
I also have a Motorola VIP 2250 connected to an HDTV using an HDMI cable. It is not in an enclosed are, and I have not noticed any real overheating. I also do not experience any periodic rebooting of the the box.
01-17-2012 2:07 PM
Mine doesn't reboot, but will just freeze instead which then requires a reset. I can only think that once summer arrives, and folks with the VIP-2250 that don't have A/C are going to be experiencing a lot more issues. My box 2250 does get pretty warm, even in the cool temps we're having right now.
01-17-2012 2:12 PM
I should clarify, mine doesn't reboot either, either freezes or everything just disappears, then have to restart it manually. I've done a factory restore, still happens.
01-26-2012 8:55 AM
01-26-2012 8:56 AM
01-27-2012 8:12 AM
The three second delay (at least on my system) is the negotiation for surround sound between U-Verse and the home theater, and is completely normal. As for the dropouts, I haven't experienced a single one since switching the vip2250, so not sure what's going on there. Beyond the obvious stuff (different HDMI cable), you can try tweaking settings on your home theater system, or failing that, you may be able to run optical TOSlink surround sound and change the HDMI input to use that sound instead on your receiver.
01-28-2012 9:57 PM
02-01-2012 5:08 AM
sound drop offs have been cured with the new receiver but I swapped that for lock ups and reboots about once a day using HDMI...last night I swapped out for the RGB and separate (analog) audio...I'll see if this stops the lock ups...picture right now is quite a bit "redder" and the sound is louder (but may be because the red/white analog audio isn't surround...
Having service trouble? There is an app for that! Use our troubleshooting tool or text myATT to 8758 to download the app. It is much faster than posting on our forums. You will also find some helpful articles below.
© 2016 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!