Contributor
•
2 Messages
All TV's: "U-verse is not available at this time. Please try again later. [Restart Receiver]"
I got this message on all TV's this morning "U-verse is not available at this time. Please try again later. [Restart Receiver]. I have restarted all receivers only to have same message appear on all TV's again. Have restarted the gateway and ended up with same result. Unplugged all TV's except one from gateway and used new Ethernet cable and still same result. Verified Broadband and Service led's were lit. What next?
Accepted Solution
Official Solution
_xyzzy_
Expert
•
15K Messages
7 years ago
Try the following in the specified order (this is a full reboot of everything):
0
Jeebs777
Contributor
•
2 Messages
7 years ago
0
0
Lisben
Contributor
•
1 Message
7 years ago
0
0
meraryan
Contributor
•
1 Message
7 years ago
0
0
BonnieV413
Contributor
•
2 Messages
7 years ago
0
0
_xyzzy_
Expert
•
15K Messages
7 years ago
WAP is wireless access point. The little box attached to your gateway that sends signals to the wireless receivers.
0
0
paswiney
Contributor
•
1 Message
6 years ago
Is the WAP the router or modem?
0
0
_xyzzy_
Expert
•
15K Messages
6 years ago
Neither. It's the box that facilitates communication between the gateway (router/modem) and a wireless receiver. Since the gateway is connected to your dvr the wireless receiver has a path to the dvr to access the dvr's recordings.
0
0
gm1892
Employee
•
1 Message
6 years ago
This solution worked for me as well. Thanks!!
0
0
skeeterintexas
ACE - Expert
•
27.7K Messages
6 years ago
When in doubt, reboot.
0
0