Tutor
•
8 Messages
Question about U-verse iPad app and home DVR subscription
Hi! A friend of mine has AT&T U-Verse service for TV and Internet access. She's got a total of 3 DVRs in her house, I think. At least she's got one DVR and a total of three U-verse receivers in her house. Anyway, she was doing some cleaning and disconnected her living room U-verse DVR. She reconnected it and eventually discovered she can no longer schedule shows to be recorded from her iPad, something she WAS able to do before disconnecting her living room DVR.
So, I went over there and took a look. She's got the "U-Verse v. 2.7.1 build 3091" iPad installed and it CAN communicate with her living room DVR. I can see the MAC address of the iPad with the living room reeiver tuned to channel 9301. The iPad app can change the channel being shown on her TV. So, the two devices ARE communicating. I can also use the U-verse remote, on her iPad, to record a show which is currently being shown on TV. The *only* thing she can't do is schedule a show to be recorded from her iPad.
When we try to look at the recordings on her iPad in the U-verse app, we get this message displayed:
---------- START ----------
Accepted Solution
Official Solution
aviewer
Expert
•
10.1K Messages
11 years ago
See if it works from Web Recording Access - https://loginprodx.att.net/commonLogin/igate_edam/controller.do?TAM_OP=login&USERNAME=unauthenticated&ERROR_CODE=0x00000000&ERROR_TEXT=HPDBA0521I%20%20%20Successful%20completion&METHOD=GET&URL=%2FFIM%2Fsps%2FATTidp%2Fsaml20%2Flogininitial%3FRequestBinding%3DHTTPPost%26PartnerId%3Dhttps%3A%2F%2Flogin.yahoo.com%2Fsaml%2F2.0%2Fatt%26Target%3Dhttp%253a%2F%2Fuversetv.att.yahoo.com%2Fwra%2Fuverse%2F%253f.lts%3D1361057945%3Ftucd567%3Dw&REFERER=&HOSTNAME=loginprodx.att.net&AUTHNLEVEL=&FAILREASON=&PROTOCOL=https&OLDSESSION=#tabs_guide
If it does not you will need to call in to have it resynched.
0
aviewer
Expert
•
10.1K Messages
11 years ago
You can try to resynching everything. Close the ipad app. pull the plug on the RG, DVR and other STBs.
Replug the RG - wait for green lights
replug the DVR - wait for picture.
Do STBs, then try the ipad app.
I much prefer the app for iphones (v2.6). It works on ipads as well, Just say it is an iphone at the top of the screen in the app store. You can see if that works.
Also, you can access the Web remote access via the browser on the ipad - https://loginprodx.att.net/commonLogin/igate_edam/controller.do?TAM_OP=login&USERNAME=unauthenticated&ERROR_CODE=0x00000000&ERROR_TEXT=HPDBA0521I%20%20%20Successful%20completion&METHOD=GET&URL=%2FFIM%2Fsps%2FATTidp%2Fsaml20%2Flogininitial%3FRequestBinding%3DHTTPPost%26PartnerId%3Dhttps%3A%2F%2Flogin.yahoo.com%2Fsaml%2F2.0%2Fatt%26Target%3Dhttp%253a%2F%2Fuversetv.att.yahoo.com%2Fwra%2Fuverse%2F%253f.lts%3D1359567840%3Ftucd567%3Dw&REFERER=&HOSTNAME=loginprodx.att.net&AUTHNLEVEL=&FAILREASON=&PROTOCOL=https&OLDSESSION=#tabs_guide
Not as convenient, but a work around til the other starts again. It may or may not be caused by the original disconnect. In any case, there is no clear path to resolution.
0
0
JefferMC
ACE - Expert
•
35K Messages
11 years ago
Also, it may be necessary to shift some thinking here.
I do not believe that the protocol used for U-verse connected apps, i.e. fairly directly from the iOS devices to the STB, is anything like how the DVR recording app works. My impression is:
There may be a communication issue between the DVR and this server farm. To try to rectify this, I would do as aviewer suggests.
0
tommydkat
Tutor
•
8 Messages
11 years ago
Thanks for the reply! When I was looking at the problem, I asked myself the same question regarding whether or not we were communicating with the right box. So, I went to channel 9301 on the box in the living room and changed the name of the receiver from "U-verse receiver" to "Living Room". After doing that, I confirmed the MAC address of the iPad was correctly displayed on the "living room" box and I confirmed on the iPad that it was connected to the receiver called "Living room".
Additionally, when I use the remote on the iPad, I can click the red "Rec" button and the red light on the front of the "living room" box lights up, indicating it's recording whatever is on TV at that particular time. I can also use the remote on the iPad to stop the recording and the red light on the "living room" box goes off.
However, I will follow your steps and see what happens.
I'll also look into using the iPhone app instead.
Thanks!
Peace...
0
0
JefferMC
ACE - Expert
•
35K Messages
11 years ago
Ah, well, telling it to record a program via the RECORD button on a remote panel is an entirely different animal from what I was saying. For some reason, I thought you were talking about recording and/or looking at recorded program listings from withing the iPad app, not on the TV while using the iPad as a remote.
0
0
aviewer
Expert
•
10.1K Messages
11 years ago
tommydkat - It is pretty complicated and we can only guess how it works by observing what we can see.
As jefferMC says the remote operation (that changes the TV screen) and the recording management are two different things.
The remote must be linked to a specific STB, but the mgmt applies the whole house DVR and the Remote web access. More opportunity for failure & less opportunity to find a specific fix. All you can do is try other windows into the process - The two I recommended. There is a third - the easy remote app.
If you are going to use the remote function, I suggest you name your STBs with short names. I use three - named DVR, IR and RF. DVR is obvious. IR is my main box controlled by the standard IR remote & RF is a second one controlled by the point anywhere RF remote.. The TVs are 50 panasonic, 20 sharp & 32 Samsung, respectively. YOu can see them in my avatar.
Set the name - menu - options- system options -TV receiver name
Edit - I see you did name the STB. so you have covered that base to make the remote more effective.
0
0
aviewer
Expert
•
10.1K Messages
11 years ago
The mention of the red record button was to say some part of the app works - it is connected to the STB.
0
0
tommydkat
Tutor
•
8 Messages
11 years ago
I do plan on going through the above mentioned steps of turning all boxes off and then powering them on in the order mentioned. I just need to arrange to head to my friend's house to do it. 🙂
Thanks again for your help! 🙂
Peace...
0
0
tommydkat
Tutor
•
8 Messages
11 years ago
Hi! Sorry for the late reply but only today was I able to try resynchronizing everything. So, I turned off ALL of the STBs and the main gateway. I turned the gateway on first and waitied for the lights to come up to show it was connected. Then, I turned on the DVR and I pressed and held the power button for 5 seconds to reset it. After it reset, I confirmed my recordings and scheduled recordings were still intact. Everything was fine. Then, I powered up and reset each STB (there are two) and when they came back up, I verified being able to access the recordings on the main DVR.
Then, we tried the iPad app and got the same problem. We then uninstalled the iPad app and installed the iPhone app and got the same message about there not being any home DVRs subscribed to. So, we uninstalled the iPhone app and re-installed the iPad app and we're back to square one.
So, since both the iPhone app and the iPad app report no home DVRs being subscribed to, the next step is to call AT&T support and track that down. In the meantime, I'll see if the web-based remote can work in the interim.
By the way, when we re-installed the iPad app, we installed version 2.8 of it.
Thanks again for your help!
Peace...
0
0
tommydkat
Tutor
•
8 Messages
11 years ago
Hi! I was JUST about to post a reply indicating that we tried the website link you posted and that DOES work! So, thanks for posting that. We'll use that for now and will call AT&T to see about fixing the synchronization issue.
Thanks again for your help!
Peace...
0
0