09-23-2013 12:43 AM
I have the highest UVerse internet package available and normally see around 17 Mbps DL and 1.4 Mbps UL whe. The TV is off. As soon as the UVerse TV box is turned on this speed drops down to around 4 Mbps DL and in the 3 digit Kbps range for UL. At the same time my modems/routers light up as a Christmas tree when the TV box is on making pretty much any port light/blink like crazy, whereas when the TV box is off everything looks normal with few blinks.
I don't find this acceptable as that far from what I had expected in regards to speed when I purchased UVerse. Any ideas as what I can/should do?
09-23-2013 5:33 AM
09-23-2013 2:19 PM
09-23-2013 9:55 PM
So just a quick question, how do I separate the multicast IPTV stream out from the rest of the Internet traffic? Interestingly enough it only seems to kill my ATT WiFi router And any device connected to it on WiFi, any connection on Ethernet cable doesn't seem to suffer.
09-24-2013 6:09 AM
09-24-2013 11:10 AM
09-24-2013 12:46 PM
12-13-2013 7:39 PM
SameJoe7777, separating tvs and internet connections did not work for me. I have 12 meg down package, due to the fact that I am far from the main ATT node I can't get more than that. I connected one tv to one RG port and another to another RG port third one is my desktop pc and fourth one a separate wifi router. If I watch one channel the connection drops to about 7, watch one + record one, connection drops to 2-3mbps, no matter if I do a speedtest on a wired device or wireless.
I was getting creative and tried many connection configurations, in all of them internet would slow down by 5-6 meg for every recording channel.
Can you explain to me technically how can the RG handle multiple TV streams and not imact the internet bandwidth if the bottleneck is the 12 meg line coming to the house. I don't get it but my neighbors are saying when their TV is turned on it doesnt drop their Inet connection at all (didnt see how they are wired though).
12-13-2013 8:28 PM
12-13-2013 8:48 PM
04-29-2014 5:52 PM - edited 04-29-2014 6:00 PM
Well, sorry to say but: Internet bandwidth and TV bandwidth are completely seperated, there is something else going on where you are, but I can garantee that watching TV will never interfere with your internet - they are not connected to eachother and do not interfere with each other.
You might want to try using Google public DNS (IPv6, not IPv4). Google public IPv6 DNS is NOTICEBALY faster than AT7T's own configuration - dont use it. You will NOT be violating ANY ATT rules whatsoever by changing your DNS. Also, Google's Public IPv6 DNS IPs are statically assigned, currently; it's yours for the duration (well there is a realistic lease expiration of 5 years!).
Recording a show, btw, takes up no more and mno less TV bandwidth - exactly the same. Your RG is doing the recording - LOCALLY. This isnt in the cloud. Yet. That comes later.
04-29-2014 11:11 PM - last edited on 04-30-2014 5:19 AM by Taylarie
I disagree, my UVerse TV is fed over the same VDSL(2) connection as my Internet and my line profile is capped at 25 Mbps, so for each HD channel I watch, which takes about 8 Mbps per stream it will definitely affect my Internet speed.
However in this case, the issue was actually in the fact that UVerse uses multicast for their STB's, which, when on, bombards the network with packages and essentially flooding the network. So one would think that you could use a switch/router with an IGMP Snooping functionality.....however this does not work, my guess is that they use some sort of proprietary stream which the IGMP Snooping is not capable of catching. So what I did to resolve the issue was to hook up a little 6 port netgear smart switch where I disabled multicast on one port and then hooked that to my main switch. This way I separated the STB multicast stream from the rest of my network, which was what was "killing" me. Another option would be to separate the networks devices using separate VLAN's.
[Edited for privacy.]
07-20-2014 4:36 PM
I had this same issue, AT&T was completely useless in resolving, but the issue is that AT&T wireless receivers completely destroys the bandwidth allowed on the wireless LAN interface. I resolved the issue by installing a new wireless router.
The configuration needed is as follows on the new router, WAN interface (Internet), you will need it to receive a DHCP address from the AT&T router.
The LAN Interface needs to be setup for any internal routed IP (I chose 192.168.2.0/24 (or 255.255.255.0 subnet mask). The new network cannot overlap AT&Ts network (default on mine was 192.168.1.0/24)
I setup the wireless name (SSID) to be xxxHome (xxx are placeholders for my initials, just my preference.)
I connected the standard ethernet cable that came with the router to the LAN interface on the AT&T router, and since then, I have had absolutely no issues with internet, wireless connectivity, or bandwidth.
The issue you will see with speedtests is that those packets are routed back inside your network to the computer initiating the test, the wireless interface is already crapping out due to wireless receivers, and with wireless operating in half duplex, your 54mbps (g/n), you only have 27mbps sustainable, and it only listens or transmits, limiting the amount of internal traffic it can handle.
AT&T could resolve this by installing an AP specifically for PCs during the installation, or adding additional wireless interfaces to their device to provide more wireless throughput due to the bad routing practices in place with their receivers.
09-08-2014 3:08 PM
I had noticed that my download speed was not always what I pay for. I had called Tech support on many occaisions and even had technicians come to house check things out, find some problems, replace modems, etc. But the problem would arise again within a few days of checking again.
I have an AT&T wireless router and a second AT&T router that feeds my wireless TV receivers. o adding a second wireless router would not make much difference if my set-up is not the same as yours. However I did get a good explaination as to why TV's disrupt internet download speeds. From 2 technicians that seemed to now their stuff between a few phone calls and questions. And it is dependent on how many HD TV streams you are watching/downloading. Every account has a 'profile' which determines the total amount of bandwith your account can consume. Mine is curently set at about 23-24 MB as far as I can guess. And that is the 'allotted' bandwidth for Phone TV, and Internet U-Verse Service. The phone gets top priority of that bandwidth, TV's second and internet last. If I have all wireless devices off, including TV's I can download a little more than 22MB's on a wired connection. However, TV's will immediately degrade that download speed. The technician that first enlightened me to this 'feature' of the system told me than any more than 2 HD TV streams being active would begin sharing my 18MB internet connection and that the maximum number of TV streams I could have incoming at once was four. In my second call I asked what would happen to my TV streams if I canceled my internet and that technician who was also savy to the TV's degrading internet bandwidth said I could still have 4 TV streams coming into the house at once, but that only 3 of them would be HD streams and the 4th would be downgraded to a standard definition stream. I also mentioned the fact that I was recently sent promo material to et even faster than the old 'max' internet package and he mentioned that yes, even though the internet bandwidth keeps growing with new equipment that the TV bandwidth has been the same the whole '7 years' he had been a tech for AT&T. It really sounds like AT&T really just needs to up the bandwidth for the TV allotment of the U-Verse Service.
09-08-2014 9:16 PM
Welcome to the AT&T TV Hub!We have some helpful articles located under TV Hot Topics.On the left you will see DIRECTV and U-verse TV links. Click on those links for more information regarding Apps, Billing, and TV troubleshooting tips.