08-23-2013 7:10 PM
I have a program scheduled to record @ 1p to 2p days of our lives, until thursday it recorded no problem. Thursday and Friday it did not record, but when I checked the schedule it showed 12p to record days of our lives, but it doesn't come on until 1p. When I checked back a little later the scheduled time showed 1pm the correct time?
So I scheduled it to record again Friday @ 8pm, while I was home, it did not record again.
What is my problem?
08-24-2013 4:46 AM
You can try three things. The first one would be to reset the DVR and see if that helps, or if you have the recording set up as a series recording (which it sounds like you do), delete the series recording and set it up again. If neither of those work, I would recommend unplugging all of your U-verse receivers from power then reset your AT&T main router. When it comes back up plug in the DVR. After that's up plug in the rest of the receivers and hopefully that will get you going.
If not post back and we can go from there.
"If you find this post helpful and it solved your issue please mark it as a solution. This will help other forum members locate it and will also let everyone know that it corrected your problem. If they have the same issue they will know how to solve theirs"
08-24-2013 6:06 AM
One other thing to check. Within the series settings see if you have it set for "first run only" or "first run and repeats". The show could have been a repeat and if you have it set for "first run only" it won't record.
08-24-2013 10:29 AM
It's set for first run, this is a daily program no reruns.
Sent: Saturday, August 24, 2013 9:06 AM
Subject: Re: - scheduled recording not recording
scheduled recording not recording
reply from apexron in General U-verse answers - View the full discussion
08-24-2013 3:17 PM
This has sometimes happened to us. Normally, resetting the DVR as beebeesa suggested (which means to turn the DVR on, then hold in the power button for 10 seconds, or until it starts blinking) works for us. But not always.
08-26-2013 7:28 AM
I'm sorry, you are experiencing issues with your DVR recordings, we will everything possible to get fixed at teh soonest.
The scheduled shows don't record mainly because of 2 things. 1. Your DVR is turned off during the scheduled time. 2. This might be a system issue.
We can take care of both the tings; Please check if your DVR is turned on, You can record shows from all your receivers but they are stored on the main DVR which has the hard drive to store them. You can identify the DVR by its Model number. The model number is located below the power button. The DVR models available with U-verse are VIP1216, VIP1225, VIP2250, IPN430, IPN4320, ISB7500. Please look for the receiver with any of the above model numbers at your premise and reboot it. (Unplug the power cable from the back of the box for 15 seconds and then plug it back). Once the TV is completely restored Try to access the recordings or Pause Live TV or try recording Live TV, if these things work fine, there are no issues with your DVR. You just need to keep it turned on for the scheduled recordings. If your main DVR is turned off, the DVR and recording features won't work.
After the reboot if you are unable to pause or record Live TV please contact us via online chat or on 1-800-288-2020. Our tech support will take care of this.
08-27-2013 10:36 AM
When ajmohanty says "turned on", he means powered up and either in use or in "standby". I don't want anyone to be confused by the fact that the DVR is powered on and functioning while in the "standby" state, where the "power" button is not lit.
08-28-2013 5:13 PM
Hopefully, the information that everyone provided in this thread helped resolve your issue. There are some known issues with certain series that have this exact issue. We constantly are working to update our systems with the correct information so issues like this do not happen. The main thing you want to check is the scheduled recordings list to see if it is scheduled to record. If it is, but it is not recording, there is an issue, and we may need to reset your DVR profile, or replace the DVR. One thing you may want to check for on your end is to make sure there are no DVR conflicts at that time with other shows recording or other people watching the TV and using all the streams. If it does not show up in the scheduled list, then it is an issue with our software we are working to correct. Please be patient with us, but in the mean time, you will have to setup an individual recording to record the show for that day. To do so, just locate that particular showing of the series, and hit the record button to record it for that instance and not as a series.
12-10-2013 3:46 PM - edited 12-10-2013 3:50 PM
I had the same problem. The DVR missed recording three daily evening news shows and several dramas. The record light was off when it should have been recording. Pressing the record button did not work either. I disconnected the power then reconnected and it started recording again immediately after reboot. Obviously this was not a recording setup problem (i.e. operator error), so why did this happen?.
Welcome to the AT&T TV Hub!We have some helpful articles located under TV Hot Topics.On the left you will see DIRECTV and U-verse TV links. Click on those links for more information regarding Apps, Billing, and TV troubleshooting tips.
© 2017 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!