04-24-2012 6:47 AM - edited 04-24-2012 6:49 AM
I just had the 18 Mbs U-Verse internet service installed last week to replace my 6 Mbs DSL service with AT&T. Since I am 3600 feet from the VRAD, they had to install the iNID setup which comprises the 2Wire i3812V outdoor unit and the i38HG indoor gateway. Actually, to gain better wireless coverage, the tech installed two of the i38HG units, one at each end of the house. The documentation for the i3812V states that the system can support up to eight of the i38HG gateways. I am wondering if I can purchase one or more additional i38HG units from AT&T and if so, how much do they cost? I am not willing to pay $6 per month to lease one. I have seen used ones on eBay priced in the $25-50 range, but I am not sure if they are compatable with my system, and buying used items is always risky.
01-11-2013 6:25 AM
I had U-Verse installed last summer including the 2Wire i38HG in-house residential gateway. Based on the above posting, I decided to see if adding a second i38HG to my house would improve the wireless signal. As part of the original install, the technician placed the i38HG on the second floor of my house in a room close to the center of the floor. Wireless coverage was strong on the second floor but only medium on the first floor with a weak/slow area in the kitchen. I got my hands on a used i38HG from ebay for $25. These things are truly plug-and-play. It took me about three minutes max to rip the unit out of the packaging, plug the power into the wall, and plug the phone line in. I placed the second unit in the kitchen where we normally have laptops, ipads, iphones, and android phones.
Voila! I now have a strong wireless signal in the kitchen. The second unit cloned the SSID and password from the primary unit and even set itself to channel 11 away from the primary unit on channel 3. If you currently have the i38HG and are looking to fill in some dead zones in your house, consider adding another i38HG!
02-22-2013 3:13 PM
02-22-2013 6:16 PM
The additional I38HG are wired as an extension of the same cable that feeds the first one from the i3812 iNID unit. Normally this is Cat 3, Cat5 or Coax.
03-14-2013 5:43 AM
Each i38HG needs power and a hot phone line. Each i38HG connects to the outside box i3812V. If you have two i38HG units the first one will act as the master and the second one as the slave. The slave will clone the wireless SSID and password from the master. The slave needs a working phone line just like the master in order to connect to the i3812V.
11-29-2013 4:53 PM
Welcome to the AT&T TV Hub!We have some helpful articles located under TV Hot Topics.On the left you will see DIRECTV and U-verse TV links. Click on those links for more information regarding Apps, Billing, and TV troubleshooting tips.
© 2017 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!