06-12-2012 1:56 PM
My computer and phones were changed to Uverse plan this morning. Ever since then my Outlook receives emails but won't allow me to send any. Mine is an old Bellsouth.net account with incoming settings of pop.bellsouth.net, port 110 (which still works) and outgoing settings of mail.bellsouth.net, port 25 (which does NOT work since Uverse setup) I don't think I should have to pay an ATT tech to fix this problem since it didn't start until they set up Uverse. My business depends on being able to send emails and now it's out for a full day!! That can add up to lots of $$$. I've tried the settings they suggest for att.net customers but mine (as I said before) is not a att.net account name so it isn't working. I've also tried the yahoo settings and those don't work either. Anybody out there have a suggestion?
03-06-2013 8:20 PM
03-06-2013 8:45 PM
It's not the client's fault. It certainly has nothing to do with multiple users sharing a single Outlook "profile.". Both Outlook and iMac Mail allow multiple profiles, and they allow you to enter a separate user id and password for the SMTP server (e.g. the att.net e-mail address), which has worked for me countless times in the past, e.g. Comcast cable modem, most corporate campuses, every hotel I've ever been in, etc., when I've had to change the STMP settings to adapt to the local environment. The problem is that Uverse requires you to use the att.net as the sender's e-mail address, regardless of how many e-mail users share the connection. This, of course, has nothing to do with the more fundamental question of why Uverse requires separate SMTP authentication in the first place, which is something AT&T DSL did not require -- DSL evidently relied on the authentication obtained via the user's Internet access through the modem.
Just to provide some of my bona fides, I've written a fair amount of SMTP, MAPI and Webmail software in C++, Java, C#, VB, etc.as stand-alone apps, for Outlook Express, Sharepoint, and for other platforms, so I am somewhat familiar with the technical issues.,
03-07-2013 4:12 AM
03-07-2013 6:11 AM
I don't think you understand. I'm not using "att e-mail." It's not like gmail or yahoo mail, i.e. it's not an e-mail client or interface. We use Outlook and Macmail as e-mail clients, and these front-end clients can connect to any backend e-mail server (POP for inbound and SMTP for outbound), and we've been using them for years with many different e-mail servers without difficulty. Moreover, changing ISPs was never a problem because I have my own domain and therefore I don't have to change my e-mail address whenever I change ISPs. The problem I (and others in this forum) have experienced with Uverse is entirely on the backend (the servers) not on the front end (the clients) because of Uverse's requirement that we all use (share) the same att.net e-mail account as the sender address.
03-07-2013 7:14 AM
What? I've never seen that problem before. I think the issue in this topic is that people were unable to send email through AT&T period.
03-07-2013 7:30 AM - edited 03-07-2013 7:36 AM
unhappyhoya - I did start my original reply with the admission that I did not understand. You have not yet provided anything to change that.
I have macmail & att mail & gmail & applemail.
Let me use four accounts as an example.
I can have firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com - set them up in macmail & choose which to use when originating a new message in macmail.
firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com - set them up in macmail & choose which to use when originating a new message.
firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com - set them up in macmail & choose which to use when originating a new message.
firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com
I believe all these four examples work the same in macmail. Can you tell me how the first one is different/unusable for you?
I have reread your last post & all I can come up with is you are not aware that the att.net e-mail sub accounts are built with different IDs in the admin section of the account.
03-07-2013 1:26 PM
03-08-2013 6:00 AM
03-17-2013 10:48 PM
04-06-2013 8:47 PM
I've been experiencing the same problems for months. I was thinking maybe I've gone crazy and forgot my password...(every day). So, three times I've changed my password and it would Outlook 2007 would work temporarily. The next day..."user name and password" pop up and would start again. This has been going on for weeks. I have changed the email server settings back to pop.att.yahoo.com and smtp.att.yahoo.com, 995, 465 and it will work for a a few hours. And then..dead again. This is clearly a problem on UVERSE's end. I don't touch the computer and hours later the problems reoccur. Outlook 2007 isn't that smart or stupid. And of course, AT&T is more than willing to have me pay for higher level service. Screw them. I'll change my internet to comcast and go to Straight Talk VOIP. I fired Uverse TV and now they're sending me $200 checks every month begging me to come back and yet they want me to pay for a friggin' email configuration????? NOT!!
04-07-2013 9:10 AM
As I said in my previous post I've been having the exact same problem. However, after a one hour remote session with our friends in India I may have a solution. From what I can tell, all of us are saavy enough to set up the server settings correctly. God knows we've all changed them enough along with changing passwords probably. What this guy did though was immediately after deleting and reinstating my email in Outlook, he immediately logged onto att.net webmail through the member center. He explained that there is a syncing issues with the yahoo servers control the email settings and it all must sync. I asked him why just not reverting back to pop.att.yahoo.com and smtp.att.yahoo.com wouldn't do the same thing. He replied that you still have to go to webmail and somehow that forces Outlook to sync with yahoo servers. Someone smarter than me might be able to explain why this is the case. I dont' understand why outlook and webmail would have anything to do with each other.
My advice? Start over. Delete your email from Outlook. Reinstall it with the standard inbound.att.net and outbound.att.net, 995, 465, ssl enabled, blah, blah, blah. Save it and THEN immediately go to webmail and log in with your user name and password.
Have no idea why it works but it did work for me. We'll see later if it does.
04-07-2013 2:38 PM
Mine eventually worked itself out so that I normally don't have a problem with sending or receiving now. HOWEVER, I travel a lot (am a travel agent) and was recently in China on a short visit. The second day there, I was unable to get my email because Yahoo started that rediculous thing AGAIN about asking for the password over and over and over ad nauseum and I was unable to work while there because of it. All I had to do was reboot my main laptop when I got home but rebooting my iPad while in China was not doing the trick. It was all evidently a problem between Yahoo and Outlook yet again. You would think a company as supposedly advanced as ATT would not have these issues after all these years but it never ends. And now that I'm home, when I click on a link in an Outlook email it locks up and rarely, if ever, takes me to the website of the link. It's always something with ATT!
04-07-2013 2:57 PM
I can tell that three times today Outlook was dead after working previously with no changes. However, after logging on to the member services tab at att.net and accessing my inbox, my email would instaneously download at that moment. Very weird but I've reproduced in three times now.
09-02-2013 8:56 PM
It is a syncing issue and the fix of logging into webmail worked like a charm.
Thanks for saving me hours of frustration after 2 hours of trying to make it work.
The key is the login to webmail which forces the sync.
Otherwise the password is not recognized by the server.
01-26-2014 3:47 AM
okay Texas guyu,, i've been tryuing to resolver this issue for weeks and your "solution" i.e.. link is not good....i have over 25 years as a p.c. consultant so i kinda have a clue....i've tried the inbound and outbound names and i simply cannot find any combination that works....but for sure the stuff on their page DOES NOT work inOutlook 2010.
Welcome to the AT&T TV Hub!We have some helpful articles located under TV Hot Topics.On the left you will see DIRECTV and U-verse TV links. Click on those links for more information regarding Apps, Billing, and TV troubleshooting tips.
Congratulations! You earned the Liz badge!