Re: Origi responded from anywhere in room including wall. New one must be pointed directly at box.
jhj0629 - Do you still have the old remote?? Or, others in the house?? Try swapping to see if it is the remote or the new DVR. If it appears to be the remote, try fresh batteries.
If the previous set worked correctly without needing to be carefully pointed, you were very fortunate because that usually produces a lot of errors.
I realize you did not change anything in the room, but the new equipment could respond differently to the previous conditions. You need to isolate the remote and DVR from outside to see how it responds - "tent" between the DVR and the remote in your hand with a blanket over a pole to see how it works.
You were fortunate to not be concerned about where to point the remote, previously. Your current experience is probably more common. But, you could ask for a new DVR, once you find that it is the DVR. Or, ask for a new remote if you find that is the cause. Or, you could swap the DVR with another STB.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
You must type a description before you click preview or reply.
We noticed you may have typed personal information in the post. Please edit or confirm OK below, then re-submit.
Share this topic
Welcome to the AT&T TV Hub!We have some helpful articles located under TV Hot Topics.On the left you will see DIRECTV and U-verse TV links. Click on those links for more information regarding Apps, Billing, and TV troubleshooting tips.