Ask a question

    Reply
    Posted Aug 20, 2013
    5:41:30 AM
    View profile
    Many Corrected Blocks in 12 hour timefame

    Hi - I had a very difficult time getting good line quality initialy, but it was corrected and has been pretty stable for 2 years. Now, however, I had spurios link resets and I'm getting a huge number of corrected blocks. Last week, the outside tech ran a line test, found nothing. Scheduled inside tech. He replaced the gateway and the customer NID. Since then, I've been monitoring the gateway stats and resettig them everyday. Over the past 24 hours, I've had  33354 corrected blocks. No uncorrected blocks, no link retrains. When the link was fixed, 2 years ago, the corrected blocks were in the 10-20 range over many days. I suspect there is an issue in the line, but need help. My experience with the techs coming out to review the issues was such that I don't believe them and "SomeJoe7777" was extremely helpful in getting the link stableized. He ran a line test and saw the Opens/shorts/bridge tapes - 50 feet from the Vrad.

     

    Would "Somejoe7777" help me again?

     

    Thanks - Peter

    Many Corrected Blocks in 12 hour timefame

    1,072 views
    14 replies
    (0) Me too
    (0) Me too
    Post reply
    View all replies
    (14)
    0
    (0)
    • Rate this reply
    View profile
    Aug 20, 2013 6:59:55 AM
    0
    (0)
    Employee
    Could you please run uvrealtime and post screen shots
    Has anthing changed in you environment, new appliances, air condition, treadmill, etc.
    Personally if within past 24 hours your stats stay corrected there is no real issue.
    Why? uverse allows up to 100 corrected errors per min or 144,000 within 24 hours.
    Your 33354 in 24 averages out to 23.16 per min. Now i do not believe you are getting
    Those every minute but reported in 15 min. Increments find high number and consider
    What was happening during that time.
    To suspect is one thing to verify is another,
    Could be inside house yes
    Could be outside your house yes
    Could be beyond uverse control, yes
    Signal noise ratio level varies based on strength of signal to relative interference.
    *I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

    Re: Many Corrected Blocks in 12 hour timefame

    2 of 15 (1,068 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 20, 2013 8:43:22 AM
    0
    (0)
    Teacher

    Hi -

    Thanks for your response. Screen shots are posted below. From my monitoring, it appears that most of these correctable errors happen in the middle of the night when there is no user activity. I do have occassional TV pixelation, short duration screen freezes, and loss of audio - picture is active, switching channels and returning to the channel corrects this.

     

     

    Bitloading-2013-08-20-10-34-37.pngErrorTable-2013-08-20-10-34-15.pngStats-2013-08-20-10-34-09.png

    Re: Many Corrected Blocks in 12 hour timefame

    3 of 15 (1,056 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 20, 2013 10:33:33 AM
    0
    (0)
    Guru

    That line looks stable, very stable.  The bitloading graph is clean with no indications of major interference sources.

     

    You should see my line.  700 feet according to UV Realtime and I've had 406,251 Corrected Blocks in a period of 27 days.

    The uversecare@att.com team, otherwise known as the uVerse Technical Support Miracle Workers.

    Re: Many Corrected Blocks in 12 hour timefame

    4 of 15 (1,037 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 20, 2013 2:07:57 PM
    0
    (0)
    Expert
    A small number of corrected blocks are normal and are not a cause for concern. Most VDSL lines in service accumulate some corrected blocks.

    As for why the behavior has changed from the past, it could be as simple as someone else in your neighborhood became a U-Verse subscriber. Their VDSL signal can cause some interference with yours if they're in the same cable bundle. The gateways and the VRAD are designed to handle this and do so by correcting the errors in transmitted blocks.

    Unless you have more severe problems with your Internet or IPTV service, your line looks very good and does not need any additional work.

    Re: Many Corrected Blocks in 12 hour timefame

    5 of 15 (1,025 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 20, 2013 2:38:09 PM
    0
    (0)
    Teacher

    Thank you for your review of this and your expertise. All in all I agree with your assesment. I will continue to monitor, as there are some strange symptoms that occur infrequently, TV freeze (momentarily), audio stops but picture continues (very weird, changing channels and then back again corrects this, but it's annoying).

    Prior to the gateway swap, changing between channel 1002(CBS HD) and 1108(TNT HD) would cause 1002 to not display  (no pic or audio) for 15-30 seconds. Has not happened since the swap.

    Again, I appreciate your rexpertise and will report more details when/if they occur.

     

    Thank You -

    Peter

    Re: Many Corrected Blocks in 12 hour timefame

    6 of 15 (1,018 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 20, 2013 5:25:25 PM
    0
    (0)
    Teacher

    Thought I'd post the error stats, plesae note the time frames  - 4:06PM and 7:15PM. The difference in corrected number of blocks is: 16793 in a 3 hour timeframe, 189 minutes, 88.85/minute (average). During this time frame, I experienced a few screen "pauses", slight freezes, all on channel 1108 (TNT HD). Channel 1108 seems to be the most problematic for me.

     

    ErrorTable-2013-08-20-19-15-55.pngErrorTable-2013-08-20-16-06-07.png

    Re: Many Corrected Blocks in 12 hour timefame

    7 of 15 (1,000 Views)
    Highlighted
    0
    (0)
    • Rate this reply
    View profile
    Aug 20, 2013 6:28:10 PM
    0
    (0)
    Expert
    Pauses and freezes that are isolated to a particular channel usually mean that maintenance may be underway in the VHO, or there is a temporary problem that is being worked on.

    ~16K corrected blocks in a 3 hour time frame is not a big deal. Many people have several thousand every few minutes and have no issues with their service.

    Re: Many Corrected Blocks in 12 hour timefame

    8 of 15 (992 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 20, 2013 9:14:40 PM
    0
    (0)
    Guru
    Edited by trparky on Aug 20, 2013 at 9:23:34 PM

    And since the Corrected Blocks are corrected in hardware by the VDSL dedicated modem chip in the gateway, it's a seamless correction of the data.

     

    The raw VDSL signal comes into the modem chip, the data is decoded and corrected if need be (corrected blocks), and then passed onto the Ethernet side of the gateway's hardware.  The data is corrected in the modem chip before the Ethernet side of the gateway's hardware even sees the incoming data.

     

    In theory, you could have millions of corrected blocks a minute and as long as the data is correctable, you will have no problems.  That is, in theory of course.

     

    Obviously, the better the VDSL chipset the better things will be and the better it will be able to handle high amounts of corrected data.  Over the years VDSL chipsets have become better able to handle abnormal line conditions.  A perfect example of this is the Motorola NVG589.  The NVG589 has been shown to be able to handle "dirtier" lines than the Pace 3800/3801 ever was able to handle.

    The uversecare@att.com team, otherwise known as the uVerse Technical Support Miracle Workers.

    Re: Many Corrected Blocks in 12 hour timefame

    [ Edited ]
    9 of 15 (981 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 21, 2013 12:06:41 PM
    0
    (0)
    Teacher

    Thank you all again for your review and expertise - much appreciated. Here is an interesting observation... each day I had corrected blocks, differing amounts for timeframes. I also have the wireless portion in use for an HP printer. Yesterday when trying to use the printer, it would not connect reliably to the wireless portion of the network. So, last evening, I connected via wired connection so we could use it. This morning I noticed the corrected block count did not increase from the value last evening when I went to bed. Today, after much investigation and troubleshooting, I resolved the issue and it is now reliably connected. Interestingly, the number of corrected blocks since last night and after reconnecting it wirelessly is 0, nada.

     

    So, my observation is that the wireless portion of the gateway device was causing the corrected block count to increase. Is this becasue of broadcasts? or activity on the gateway? Very curious indeed.

    Re: Many Corrected Blocks in 12 hour timefame

    10 of 15 (944 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 21, 2013 12:46:53 PM
    0
    (0)
    Teacher

    well I now have corrected blocks...

    Re: Many Corrected Blocks in 12 hour timefame

    11 of 15 (931 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 22, 2013 8:54:02 AM
    0
    (0)
    Administrator

    @horntoad , it sounds like you're still having problems. We can certainly try to help. Send us a private message at ATTU-verseCare. We have a great team of specialists ready and willng to assist. 


    Rethink Possible

    For account specific help, please send a private message to ATTCustomerCare

    Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions here.

    *I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

    Re: Many Corrected Blocks in 12 hour timefame

    12 of 15 (887 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 22, 2013 9:08:20 AM
    0
    (0)
    Teacher

    HI Julie - I don't know the email addr of ATTU-verseCare. I'd gladly discuss or send message, though I don't think I have an issue.

     

    Thanks

    Re: Many Corrected Blocks in 12 hour timefame

    13 of 15 (881 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 22, 2013 10:24:38 AM
    0
    (0)
    Guru

    Contact AT&T Customer Care here:
    http://forums.att.com/t5/notes/privatenotespage/tab/compose/note-to-user-id/192773

    Send them a private message and they should be able to give the help needed to solve your problems. They are available M-F 7am-10pm CST

    Include your account#, email address and a good phone # (land or cell) and time to contact you on.

    Check the blue PM envelope in the upper right, they may or may not contact you via message on these forums so you might want to check that in about a day.

    The uversecare@att.com team, otherwise known as the uVerse Technical Support Miracle Workers.

    Re: Many Corrected Blocks in 12 hour timefame

    14 of 15 (865 Views)
    0
    (0)
    • Rate this reply
    View profile
    Aug 23, 2013 1:19:10 PM
    0
    (0)
    Teacher

    Hi -

     

    I've sent 3 emails to the address provided 2 yesterday and 1 this morning, but have yet to hear from anyone. I've been reviewing the forums on audio loss, and most point an issue using HDMI and 5.1 surround sound. I am using HDMI, but have my STB (Cisco) set to stereo - directly connected to the Samsung TV. I lost audio on 1108, and 1602 last evening. Some momentary some for maybe 30 seconds. Forums point to a syncing issue of the audio stream and most are from a couple years back. But I have this issue currently. Is there a solution? 

     

    Thanks,

    Peter

    Re: Many Corrected Blocks in 12 hour timefame

    15 of 15 (825 Views)
    Share this post
    Share this post