How does this Bitloading look?

Scholar

How does this Bitloading look?

Message 1 of 7 (317 Views)
Employee

Re: How does this Bitloading look?

Dont like the raking pattern in the first beginning up to 1200 am radio frequency, seen it before just due not immediately recall why. Can you post rest of screen shots, expect your about 800 feet based on strength of signal.
Employee Contributor*
*I am an AT&T employee and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
Message 2 of 7 (308 Views)
Scholar

Re: How does this Bitloading look?

[ Edited ]

Message 3 of 7 (299 Views)
Scholar

Re: How does this Bitloading look?

The raking is what I was looking at too. I check Realtime every so often just to see stats, and it never use to be that way. Just wondering if there is any concern or just keep an eye on it.

Message 4 of 7 (295 Views)
Highlighted
Employee

Re: How does this Bitloading look?

A hugh number of errors within past 24 hours, did a big thunderstorm go through, would account for errors, and possible have moisture in line resulting in raking, but back,of my mind I am,thinking either grounding issue or gateway issue. I recall a post by somejoe7777 on raking, just do not recall details

Your distance of 1400 feet with very good 20 SN and max sync sync almost 54M leads me to believe your on a K card.

At that distance either the 3800 or 3801 RG would function well, in case you pursue replacing RG if raking does not clear up or gets worse.
Employee Contributor*
*I am an AT&T employee and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinions.
Message 5 of 7 (275 Views)
Scholar

Re: How does this Bitloading look?

Message 6 of 7 (209 Views)
Scholar

Re: How does this Bitloading look?

Ok the raking looks alittle better but the FEC rate is off the hook. But one thing I also notice is that I'm closer to the VRAD, my max rate increased and my default gateway has changed.

Message 7 of 7 (208 Views)
Share this topic
Announcements

Welcome to the AT&T Community Forums!!! Stop by the Community How-To section for tips on how to get started.