Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Jan 7, 2014
4:53:49 PM
View profile
Foscam 8910W external connection

Hi I was setting up my foscam 8910 ip camera and was unable to view it externally.

 

I setup my 2wire 3801HGV to connect to my personal Linksys AC1750  according to the following post #2

 

http://forums.att.com/t5/Residential-Gateway/U-verse-for-BUSINESS-2Wire-3600HGV-bridge-mode-or-anoth...

 

I setup single port forwarding on my Linksys and im able to view my camera on the LAN.  

I tried to setup the 2wire router for the same pinhole but I still cant access my cameras externally. 

 

i noticed that the DMZ setup opens all the ports for my linksys on my 2wire. 

 

any assistance is greatly appreciated.  

 

btw I reloaded my camera to no avail.  

 

Thanks

Joe

Hi I was setting up my foscam 8910 ip camera and was unable to view it externally.

 

I setup my 2wire 3801HGV to connect to my personal Linksys AC1750  according to the following post #2

 

http://forums.att.com/t5/Residential-Gateway/U-verse-for-BUSINESS-2Wire-3600HGV-bridge-mode-or-another-AT-amp/td-p/2707013#.UsyO6RCn65t

 

I setup single port forwarding on my Linksys and im able to view my camera on the LAN.  

I tried to setup the 2wire router for the same pinhole but I still cant access my cameras externally. 

 

i noticed that the DMZ setup opens all the ports for my linksys on my 2wire. 

 

any assistance is greatly appreciated.  

 

btw I reloaded my camera to no avail.  

 

Thanks

Joe

Foscam 8910W external connection

509 views
2 replies
(0) Me too
(0) Me too
Reply
View all replies
(2)
Highlighted
0
(0)
  • Rate this reply
View profile
Jan 8, 2014 7:08:42 AM
0
(0)
Contributor

Btw my address scheme in case its needed!  

 

2wire subnet      -192.168.1.x  255.255.255.0

Linksys subnet  - 192.168.2.x  255.255.255.0

 

Foscam  static  - 192.168.2.101 255.255.255.0  

                    gw - 192.168.2.1 dns 192.168.2.1 port 5001

 

Should i move my cameras to the 2wire subnet and open the pinholes there or can i keep them on my linksys?  i need to be able to view them on my Lan and Externally.   

 

 

Btw my address scheme in case its needed!  

 

2wire subnet      -192.168.1.x  255.255.255.0

Linksys subnet  - 192.168.2.x  255.255.255.0

 

Foscam  static  - 192.168.2.101 255.255.255.0  

                    gw - 192.168.2.1 dns 192.168.2.1 port 5001

 

Should i move my cameras to the 2wire subnet and open the pinholes there or can i keep them on my linksys?  i need to be able to view them on my Lan and Externally.   

 

 

Re: Foscam 8910W external connection

2 of 3 (476 Views)
0
(0)
  • Rate this reply
View profile
Jan 14, 2014 10:03:03 AM
0
(0)
Community Manager

Hello @JTran2 

 

One of our U-Verse specialists might be able to help. Please send a private message here with your name, phone number and the best time you can be reached.

 

Thank you,

Dmitriy


Rethink Possible


Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions: Learn More.

Hello @JTran2 

 

One of our U-Verse specialists might be able to help. Please send a private message here with your name, phone number and the best time you can be reached.

 

Thank you,

Dmitriy


Rethink Possible


Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions: Learn More.

I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.
*I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

Re: Foscam 8910W external connection

3 of 3 (348 Views)
Share this post
Share this post