09-05-2013 8:48 AM
so I reboot DVR by unplugging power cord from back, then it comes back to life. This happens pretty often, like every couple days or so. Any thoughts? Tests I could do? DVR is connected via coax to RG in another room, also have 2 wireless STBs.
09-05-2013 9:10 AM
09-05-2013 9:27 AM - edited 09-05-2013 9:28 AM
No TV near RG. RG is in den/office about 20' from TV in family room as crow flies or probably about 40' of coax. House is full of old cat 5 wiring from previous owners networking attempts, but who knows what connects to what at this point. I think he had a switch or router in the den as there's a couple banks of 6 wall jacks, so maybe there's a run from there to family room. Naturally nothing is labeled. We also have hundreds of feet of coax from an old A/B cable installation as well as a dish.
If I can find a run of cat 5 cable from den to family room, is it worth trying to use for DVR? I would need a box to wall cord at each end.
Thanks for the help - we'll have to see if there's any important recordings and if not maybe try to get a new box.
09-05-2013 9:51 AM
09-05-2013 1:39 PM
I get your point about not hooking up to a bunch of unknowns for testing. May have a long cable around here somewhere that was used for laptop in the pre-wifi days. Do I just hook up DVR to one of the ports on the RG? or do I need to configure something?
Another note: I tried Uverse troubleshooting app, which remotely rebooted RG - had not been rebooted in 107 days. Have not had Power/Link lockup problem today altho it may show up yet.
Thanx again for the advice.
09-05-2013 3:04 PM
10-03-2013 7:46 AM
Finally got this fixed. ATT tech came by and decided the coax port on the RG was not up to snuff. He said his supervisor told the guys they were swapping out too many RG's, so he fixed us up with CAT5 cable to our DVR (cables were more or less there but needed different terminations.) And he pointed out that signal was weak to both our wireless STB's. I never noticed the signal strength bars on the boxes before, probably because none of them were lit. He moved the TV access point to a more central location, also fixing up CAT5 to it, and lots of bars are lit. As of now, there's only one piece of live coax in the house - the one that connects one old TV to its STB.
Now for one final question: Is it desirable or possible to turn off HomePNA on RG, since we're not using it any more?
Welcome to the AT&T TV Hub!We have some helpful articles located under TV Hot Topics.On the left you will see DIRECTV and U-verse TV links. Click on those links for more information regarding Apps, Billing, and TV troubleshooting tips.