01-11-2014 11:09 AM
I saw the forum about what to do with the wireless gateway, but when I go into to disable pinpoint area on the gateway my router name is showing up 3 times and it only lets you select the DMZ option for one thing otherwise it gives an error.
I just oust chose one and the asus router is still not working right can connect to the option of the router from the outside through their app AICloud or through VPN or through the DDNS setup option they have
any help on this? I'm newer to understanding all the IP address stuff.
asus us says it has to do with att. NAT setting and that I need to basically bridge the two routers
01-15-2014 1:09 PM
Which U-verse gateway do you have?
"If you find this post helpful and it solved your issue please mark it as a solution. This will help other forum members locate it and will also let everyone know that it corrected your problem. If they have the same issue they will know how to solve theirs"
02-22-2014 12:26 PM
I set mine up in AP mode on the ASUS router, it works most of the time, but there's another thread I contributed to about the WIFI dropping, look for a wiki on IP addressing, it's not too hard, but it can get confusing with all the different subnet masks and gateway addresses.
© 2016 AT&T Intellectual Property.This link will open a new window All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners.
Congratulations! You earned the Liz badge!