Changing the DMZ device on a 3801HGV

Highlighted
Contributor

Changing the DMZ device on a 3801HGV

Hello,

I have a 3801HGV gateway with my 24Mb Uverse internet service. I have a 3rd party router
(Netgear WNDR3700 v3) that is set with it's own subnet.
When trying to set the 3801HGV for a DMZ device using the MAC address of the Netgear router,
I get the following error:

A DMZplus PC is already configured. Remove this PC from DMZplus configuration and reboot it
first.

My first question is, how do I remove the currently selected device from the DMZplus
configuration? I do not see a way to do this.

I have a manual for this particular 2Wire gateway and it does not mention anything about
changing a DMZ entry.

Thank You!!

Message 1 of 3 (2,370 Views)
Tutor

Re: Changing the DMZ device on a 3801HGV

 Select the option "Maximum protection..." or something like that. This removes the DMz bullet, then click save.

Message 2 of 3 (2,322 Views)

Re: Changing the DMZ device on a 3801HGV

I did it by by going to Diagnostics-->Resets and clicking on the "Firewall Configuration Reset" link.

Message 3 of 3 (2,082 Views)
Share this topic
Announcements

Welcome to the AT&T Community Forums!!! Stop by the Community How-To section for tips on how to get started.