Accessing my LAN via VPN through Pace Gateway - router behind

Highlighted

Accessing my LAN via VPN through Pace Gateway - router behind

AT&T upgraded us to a Pace Model 5031NV-030 as a gateway into my business. I purchased a static IP. I find that this unit does not provide VPN connectivity. I have Cisco ATA 5505 that can serve as a VPN server. I have tried to make these play nice to no avail. I am looking for help to make both units meet the objective of allowing remote users access my LAN via VPN. Any help will be greatly appreciated - even if it is a pointer to someone who can help.

Tags (3)
664 Views
Message 1 of 2
Expert

Re: Accessing my LAN via VPN through Pace Gateway - router behind

See the following post for instructions to set up your own router using the DMZPlus feature:

http://forums.att.com/t5/Residential-Gateway/U-verse-for-BUSINESS-2Wire-3600HGV-bridge-mode-or-anoth...

 

Once your Cisco ASA is the DMZ plus device and has the public IP address, inbound VPN should work.  Alternatively, you can set up the outside interface of the ASA to use a static IP address from your purchased block rather than the DMZPlus address.

 

 

Message 2 of 2
You must type a description before you click preview or reply.
Share this topic
Announcements

Welcome to the AT&T TV Hub!
We have some helpful articles located under TV Hot Topics.
On the left you will see DIRECTV and U-verse TV links. Click on those links for more information regarding Apps, Billing, and TV troubleshooting tips.

Additional Support