AT&T router with an iNid installation

AT&T router with an iNid installation

Ok, I have what I think is a newbie question.  In my previous two installations I've been FTTP with an RG. In my house that I moved to last year I now have an iNid installation and nothing more than a router in the house.  My question is, do I need to use the AT&T router or can I purchase my own router and replace the AT&T one. 

” Auto racing, bull fighting, and mountain climbing are the only real sports … all others are games.”- Ernest Hemingway
Message 1 of 10 (548 Views)
ACE - Expert

Re: AT&T router with an iNid installation

[ Edited ]

You mean you have the 38HG in your home?  It's not exactly a full layer 3 router, it's more like a layer 2 switch/WAP that does some layer 3 peeking (it handles IGMP v3 correctly, at least enough for U-verse IPTV).

 

I think the answer to your question is maybe.  Normally the i38HG speaks the HPNA protocol over whatever media its connected to the i3812 with.  There is another RJ45 jack on the i3812 that is a full Ethernet jack but comes from the factory disabled.  You'd have to use the 38HG to talk to the i3812 to enable the Ethernet jack before you could use it.  Once you did that, then you could hook your router to that Ethernet jack and disconnect the 38HG.

 

However, the i3812 is still providing most of the routing functionality you'd associate with the RG in a box in your home, so I'm not sure what you'd be accomplishing by doing this.

 

Want to tell us why you think you might want to do this?

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 2 of 10 (530 Views)

Re: AT&T router with an iNid installation

I'm on my second one now and it acts like it's failing as well.  The past week or so I've only been getting about 2.5Mbps down wired or wireless.  I was thinking I could just get a linksys or netgear router, plug the cable going to the router and go from there. I have a powerline network now that is showing as the lowest signal possible coming right out of the router and while stable, it hasn't improved anything.  Currently running one ext. HDD, my slingbox and the powerline network off of it, wired and two roku's and an ipad running wireless.

” Auto racing, bull fighting, and mountain climbing are the only real sports … all others are games.”- Ernest Hemingway
Message 3 of 10 (521 Views)
ACE - Expert

Re: AT&T router with an iNid installation

Yeah, I'd get wireless router and connect it to the i3812 as an Access Point, and hook all your gear to that.

 

I'd still have them replace the 38HG, but have all your equipment on the other so you're no longer affected by its issues.  You still need a working 38HG in case your i3812 gets factory reset.  You can leave it turned off, or you can set it up as an alternate wireless access point.

 

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 4 of 10 (514 Views)
Anonymous

Re: AT&T router with an iNid installation

I would recommend enabling the outside ethernet port, connecting a 3rd-party router, and setting it to DMZ mode.

Message 5 of 10 (487 Views)

Re: AT&T router with an iNid installation

So, it's not my router that is the problem.  Last night internet went out, unplugging and plugging my router (which typically fixes the issue) didn't resolve. Then today I've had all services quit 3x.  Resetting the power supply in the garage has restored the service.  Called technical support, have a tech coming out Saturday between 8-12.  The tests techincal support ran on my lines failed so there definately won't be any charage for the trip. Hopefully Saturday afternoon I'll have full services restored and my internet speeds will go back to my normal 11.5 down and not the 2/2.5 I've been having.

” Auto racing, bull fighting, and mountain climbing are the only real sports … all others are games.”- Ernest Hemingway
Message 6 of 10 (433 Views)
ACE - Expert

Re: AT&T router with an iNid installation

Tell them they need to give you an NVG 589.  Smiley Wink

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 7 of 10 (423 Views)

Re: AT&T router with an iNid installation

Will it work with an iNid installation?

” Auto racing, bull fighting, and mountain climbing are the only real sports … all others are games.”- Ernest Hemingway
Message 8 of 10 (419 Views)
Highlighted
ACE - Expert

Re: AT&T router with an iNid installation

Yep.  Basically, the iNID becomes just a plain old NID and they run both pair into your house into the NVG 589.

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Message 9 of 10 (415 Views)

Re: AT&T router with an iNid installation

hmmm, will have to ask the tech about it. I'll see if I can pry any info about stream boosts and internet speed boosts.

” Auto racing, bull fighting, and mountain climbing are the only real sports … all others are games.”- Ernest Hemingway
Message 10 of 10 (396 Views)
Share this topic
Announcements

Welcome to the AT&T Community Forums!!! Stop by the Community How-To section for tips on how to get started.