"Client Initialization" error - Stuck on Orange screen!
I had to restart my U-verse TV receiver. It would not get past the orange AT&T Uverse screen. After about a half hour the screen said "Client Initialization Error"
I believe I know what causes the problem. The receiver is trying to contact a server on the internet and is not able to.
For me it was because the Gateway had thought it detected a security problem and was redirecting internet request to "gateway.2wire.net/". Once I resolved this, I restarted the U-verse TV receiver and it worked correctly. Another person in the forums had a "Router Behind Router" warning page that caused the same problem.
Other things to check:
It is OK to try restarting the Gateway, but do NOT push the red button on back of the Gateway until you have tried everything else and are speaking with Tech support.
1. Is your Gateway/Router working (can you use your U-verse phone and internet?)
2. Is the receiver properly connected to the Gateway? One at a time, disconnect and reconnect each cable. If it is connected to the Gateway with coax cable (round cable, round screw in plugs) make sure the HPNA light is green on the Gateway.
3. Try getting on the internet with every computer or wireless device you have connected to your home network. My main computer was getting on the net fine, but my iPhone was redirected to the error page. If you get a warning page, clear it and make sure you can get to the internet.
Your main goal is that your receiver can get onto the internet so it can initialize and get past the orange screen. Good luck.
You must type a description before you click preview or reply.
We noticed you may have typed personal information in the post. Please edit or confirm OK below, then re-submit.
Share this topic
Welcome to the AT&T TV Hub!We have some helpful articles located under TV Hot Topics.On the left you will see DIRECTV and U-verse TV links. Click on those links for more information regarding Apps, Billing, and TV troubleshooting tips.