Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Dec 25, 2009
12:38:41 AM
Unable to access the 2wire settings page.
My computer is able to recognize the router and it's address, yet for some reason whenever I put in the IP address (192.168.1.254) it tells me page load error, it's been doing this on all of my computers since I upgraded to the U-Verse package. It's a bit upsetting not being able to forward ports or anything. If anyone has any ideas on what I can do to resolve this issue I'd greatly appreciate it, currently I've got a headache trying to figure it out myself.
Message Edited by ElSitherino on 12-25-2009 12:49 AM
My computer is able to recognize the router and it's address, yet for some reason whenever I put in the IP address (192.168.1.254) it tells me page load error, it's been doing this on all of my computers since I upgraded to the U-Verse package. It's a bit upsetting not being able to forward ports or anything. If anyone has any ideas on what I can do to resolve this issue I'd greatly appreciate it, currently I've got a headache trying to figure it out myself.
Message Edited by ElSitherino on 12-25-2009 12:49 AM

Unable to access the 2wire settings page.

3,353 views
11 replies
(0) Me too
(0) Me too
Reply
View all replies
(11)
0
(0)
  • Rate this reply
View profile
Dec 25, 2009 6:51:10 AM
0
(0)
ACE - Master

Try this:  http://192.168.1.254/mdc

 

You will need the password off of the RG.

"If you find this post helpful and it solved your issue please mark it as a solution.  This will help other forum members locate it and will also let everyone know that it corrected your problem. If they have the same issue they will know how to solve theirs"

Try this:  http://192.168.1.254/mdc

 

You will need the password off of the RG.

"If you find this post helpful and it solved your issue please mark it as a solution.  This will help other forum members locate it and will also let everyone know that it corrected your problem. If they have the same issue they will know how to solve theirs"

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Unable to access the 2wire settings page.

2 of 12 (3,353 Views)
0
(0)
  • Rate this reply
View profile
Dec 25, 2009 7:09:37 AM
0
(0)
Scholar

Check the output of "ipconfig /all" on your computer.  That assumes it is a Windows box.

 

Look for the internet gateway IP.  That should be the IP to use to contact your RG.  It is normally 192.168.1.254, but that could have been changed.

Check the output of "ipconfig /all" on your computer.  That assumes it is a Windows box.

 

Look for the internet gateway IP.  That should be the IP to use to contact your RG.  It is normally 192.168.1.254, but that could have been changed.

Re: Unable to access the 2wire settings page.

3 of 12 (3,353 Views)
0
(0)
  • Rate this reply
View profile
Dec 25, 2009 11:50:54 AM
0
(0)
Scholar

Are you using Open DNS? I can't access parts of my 2Wire gateway either if I have hardcoded the Open DNS servers into my computer.

 

 Bob

Are you using Open DNS? I can't access parts of my 2Wire gateway either if I have hardcoded the Open DNS servers into my computer.

 

 Bob

Re: Unable to access the 2wire settings page.

4 of 12 (3,353 Views)
0
(0)
  • Rate this reply
View profile
Dec 25, 2009 12:22:59 PM
0
(0)
ACE - Expert

BeeBee's link above should work for everyone, no matter who you've hardcoded your DNS for. :smileywink:

 

Edit: Just switched my DNS to openDNS and the link worked just like I said it would,  Something is

wrong in your system setup if it doesn't work. You can not access it w/gateway.2wire.net addresses.

 

Chris


Please NO SD stretch-o-vision or 480 SD HD Channels
1-800-983-2811 to avoid Mr. Voice Recognition
YRMV IMHO Simply a U-verse user, nothing more
Message Edited by mibrnsurg on 12-25-2009 03:33 PM

BeeBee's link above should work for everyone, no matter who you've hardcoded your DNS for. :smileywink:

 

Edit: Just switched my DNS to openDNS and the link worked just like I said it would,  Something is

wrong in your system setup if it doesn't work. You can not access it w/gateway.2wire.net addresses.

 

Chris


Please NO SD stretch-o-vision or 480 SD HD Channels
1-800-983-2811 to avoid Mr. Voice Recognition
YRMV IMHO Simply a U-verse user, nothing more
Message Edited by mibrnsurg on 12-25-2009 03:33 PM
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Unable to access the 2wire settings page.

5 of 12 (3,353 Views)
0
(0)
  • Rate this reply
View profile
Dec 26, 2009 11:50:16 AM
0
(0)
Tutor
Thanks for the replies, I started checking it out and figured out that it was the switch they put in when they upgraded my setup to U-Verse. Unfortunately addressing my issues with pulling up my 2wire configuration page cut off my television service, I guess I'll need to give AT&T a call to get this set up properly
Thanks for the replies, I started checking it out and figured out that it was the switch they put in when they upgraded my setup to U-Verse. Unfortunately addressing my issues with pulling up my 2wire configuration page cut off my television service, I guess I'll need to give AT&T a call to get this set up properly

Re: Unable to access the 2wire settings page.

6 of 12 (3,353 Views)
0
(0)
  • Rate this reply
View profile
Dec 27, 2009 10:38:24 AM
0
(0)
ACE - Master

mibrnsurg wrote:

BeeBee's link above should work for everyone, no matter who you've hardcoded your DNS for. :smileywink:

 

Edit: Just switched my DNS to openDNS and the link worked just like I said it would,  Something is

wrong in your system setup if it doesn't work. You can not access it w/gateway.2wire.net addresses.

 

Chris


Please NO SD stretch-o-vision or 480 SD HD Channels
1-800-983-2811 to avoid Mr. Voice Recognition
YRMV IMHO Simply a U-verse user, nothing more
Message Edited by mibrnsurg on 12-25-2009 03:33 PM

 

Chris, I have the same problem.  When I switched to open DNS to try to speed up my e-mail access I discovered that I could no longer access the RG.  I could still access the stats.  But,  not the address that gives me all the RG settings and read-outs.  When open DNS started to slow down and became really not much better than what I had before....I switched back.   Yahoo has some real problems in this area IMHO.

The problem with socialism is that you eventually run out of other peoples' money. .......Margaret Thatcher

mibrnsurg wrote:

BeeBee's link above should work for everyone, no matter who you've hardcoded your DNS for. :smileywink:

 

Edit: Just switched my DNS to openDNS and the link worked just like I said it would,  Something is

wrong in your system setup if it doesn't work. You can not access it w/gateway.2wire.net addresses.

 

Chris


Please NO SD stretch-o-vision or 480 SD HD Channels
1-800-983-2811 to avoid Mr. Voice Recognition
YRMV IMHO Simply a U-verse user, nothing more
Message Edited by mibrnsurg on 12-25-2009 03:33 PM

 

Chris, I have the same problem.  When I switched to open DNS to try to speed up my e-mail access I discovered that I could no longer access the RG.  I could still access the stats.  But,  not the address that gives me all the RG settings and read-outs.  When open DNS started to slow down and became really not much better than what I had before....I switched back.   Yahoo has some real problems in this area IMHO.

The problem with socialism is that you eventually run out of other peoples' money. .......Margaret Thatcher
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Unable to access the 2wire settings page.

7 of 12 (3,353 Views)
0
(0)
  • Rate this reply
View profile
Dec 27, 2009 12:22:40 PM
0
(0)
ACE - Expert

Phil, see if you can get to this page that will list your software version and can see if still 5.29.135.47?

 

http://192.168.1.254/xslt?PAGE=A07&THISPAGE=A01&NEXTPAGE=A07

 

No password required. :smileysurprised:

 

Edit:  About 7-10 days ago I switched back to the RG for DNS and have not had a single problem

relating to DNS since then, think they fixed the DNS problems w/VDSL2 download.

 

Chris


Please NO SD stretch-o-vision or 480 SD HD Channels
1-800-983-2811 to avoid Mr. Voice Recognition
YRMV IMHO Simply a U-verse user, nothing more
Message Edited by mibrnsurg on 12-27-2009 03:31 PM

Phil, see if you can get to this page that will list your software version and can see if still 5.29.135.47?

 

http://192.168.1.254/xslt?PAGE=A07&THISPAGE=A01&NEXTPAGE=A07

 

No password required. :smileysurprised:

 

Edit:  About 7-10 days ago I switched back to the RG for DNS and have not had a single problem

relating to DNS since then, think they fixed the DNS problems w/VDSL2 download.

 

Chris


Please NO SD stretch-o-vision or 480 SD HD Channels
1-800-983-2811 to avoid Mr. Voice Recognition
YRMV IMHO Simply a U-verse user, nothing more
Message Edited by mibrnsurg on 12-27-2009 03:31 PM
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Unable to access the 2wire settings page.

8 of 12 (3,353 Views)
0
(0)
  • Rate this reply
View profile
Dec 27, 2009 12:24:48 PM
0
(0)
Scholar

hpmsrm wrote:
Chris, I have the same problem.  When I switched to open DNS to try to speed up my e-mail access I discovered that I could no longer access the RG.

Strange.

 

You should be able to access the RG at 192.168.1.254, or at 192.168.1.254/mdc for the full management page.  No DNS lookup occurs for that, so whether you are using OpenDNS should not affect it.

Message Edited by nwrickert on 12-27-2009 02:26 PM

hpmsrm wrote:
Chris, I have the same problem.  When I switched to open DNS to try to speed up my e-mail access I discovered that I could no longer access the RG.

Strange.

 

You should be able to access the RG at 192.168.1.254, or at 192.168.1.254/mdc for the full management page.  No DNS lookup occurs for that, so whether you are using OpenDNS should not affect it.

Message Edited by nwrickert on 12-27-2009 02:26 PM

Re: Unable to access the 2wire settings page.

9 of 12 (3,353 Views)
0
(0)
  • Rate this reply
View profile
Dec 29, 2009 8:23:12 AM
0
(0)
Contributor

I'm having the same problem, probably for around a month, with the minor difference that I don't see connection errors, it simply never responds.

 

I haven't switched DNS, indeed I haven't changed anything since it last worked.  I've power-cycled the RG, to no avail.  I can ping it and it responds.  It serves DNS just fine.  If I try a different port it refuses the connection immediately, but ports 80 and 443 accept connections but then never do anything.

 

It's weird.  It operates just fine in every normal way, but I can't reach the settings page.  Good thing I don't have to change any settings. 

I'm having the same problem, probably for around a month, with the minor difference that I don't see connection errors, it simply never responds.

 

I haven't switched DNS, indeed I haven't changed anything since it last worked.  I've power-cycled the RG, to no avail.  I can ping it and it responds.  It serves DNS just fine.  If I try a different port it refuses the connection immediately, but ports 80 and 443 accept connections but then never do anything.

 

It's weird.  It operates just fine in every normal way, but I can't reach the settings page.  Good thing I don't have to change any settings. 

Re: Unable to access the 2wire settings page.

10 of 12 (3,353 Views)
0
(0)
  • Rate this reply
View profile
Dec 29, 2009 8:35:56 AM
0
(0)
Master

try   " HOME "

 

 

 

 

randy

try   " HOME "

 

 

 

 

randy

Re: Unable to access the 2wire settings page.

11 of 12 (2,370 Views)
0
(0)
  • Rate this reply
View profile
Dec 29, 2009 2:03:12 PM
0
(0)
Scholar

 I'm seeing the same thing while using OpenDNS. I can access the RG stats page but nothing more. If I change my network settings on my computer to automatically find DNS then I can access everything in the RG.

 

 Bob

 I'm seeing the same thing while using OpenDNS. I can access the RG stats page but nothing more. If I change my network settings on my computer to automatically find DNS then I can access everything in the RG.

 

 Bob

Re: Unable to access the 2wire settings page.

12 of 12 (2,370 Views)
Share this post
Share this post