08-18-2010 6:27 PM
With excess time on my hands I downloaded U-Verse Realtime today and obtained a lot of number which mean little to me. Things like Max Rate 42,238, Profile 25,208/2040. Is there a guide to reviewing this? Screenshot posted below.
08-18-2010 6:52 PM
SomeJoe has excellent documentation in the Readme file located in U-verse Realtime directory created on your computer when you installed the program.
Documentation file also available in Start Menu -> Programs -> U-Verse Realtime -> ReadMe.
Also available on the U-Verse Realtime web site's downloads section.
08-19-2010 10:36 AM
I now see the images - hopefully SJ7777 can respond back with his analysis.
08-19-2010 11:30 AM
Read the instructions. Very good explanation of the numbers. I could still use some analysis from someone who can interpret the data. Can the pictures be seen yet?
Nothing stands out on the realtime data and if 2000' is close to accurate, I'd say you might be able to get the 32/5 profile at a 42M max rate. Call and see, but watch for errors/problems if it downloads and might have to go back to 25/2 profile. Good luck
Edit: Did a quick calculation on your bitload and you do have enough for the downstream portion w/just about enough reserve bits, but don't know if the upload can adjust from the 733 to the 1600 or so you'll need for 32/5.
Please NO SD stretch-o-vision or 480 SD HD Channels
1-866-465-1496 for direct TS to avoid Mr. Voice recognition
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more
08-19-2010 2:46 PM
I agree with Chris. No problems evident from your screen shots.
32/5 may work, may not. Downstream is very close, you just barely have enough max rate to do it. Upstream is a question mark. Might have enough for 5 Mbps upload, might not.
08-27-2010 4:20 PM
It appears to be working. I can record 3 HD channels at the same time. The system info shows Wan 1sd/3hd, ingress 1sd/3hd and egress 1sd/2hd. However, U-verse realtime and the Rg both still show a profile of 25,208/2040. is this as it should be?
08-27-2010 5:49 PM
Hello. My WAN is 1SD/3HD. My Ingress reads 2SD/2HD. Is this correct or should it read 1SD/3HD; if so, how do I fix this problem?
U-verse is in the process of pushing out the 1 SD/3 HD Ingress Profile to customers on the 32/5 profile. I received the update here in Dallas last week. Where are you located?
Some have reported that their Ingress Profile was updated after a reboot or their DVR/STB.