They just installed a new buried drop with twisted pair and a new INID. The INID is being used with a single pair instead of bonding. Can someone tell what this bit loading screen shot means? The first spike at about 200 mhz?
Your bitloading is normal for an iNID installation with a single line.
iNID installations preferentially use a very low frequency range (40 - 138 kHz) for the upload spectrum. This is done to increase service distance. Normally, both lines of the pair-bonded installation use this range and combined together, they get around 1.5 Mbps of upload bandwidth.
Your installation can't get enough upload bits in that low range with only 1 line, so some additional upload bandwidth is allocated in the 4+ MHz range.
You must type a description before you click preview or reply.
Share this topic
Welcome to the AT&T TV Hub!We have some helpful articles located under TV Hot Topics.On the left you will see DIRECTV and U-verse TV links. Click on those links for more information regarding Apps, Billing, and TV troubleshooting tips.