Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Jan 12, 2011
11:28:16 PM
printer wired to desktop no longer accessed by laptop wireless connect. post uverse install

Prior to today, had att dsl connected via ethernet cable from westell modem to desktop and wireless connection from modem to laptop.  Wired printer connected to desktop was shared with laptop via same modem.  Uverse service was installed today.  Laptop can no longer access printer.

 

I want to keep printer connected to desktop via LPT1 and share with laptop via wireless connection.

 

My knowledge is very limited when it comes to networks, modems, wireless connections, etc...  So, if you can help me, please limit use of acronyms and technical jargon and polysyllabic words e.g., go to (blank), click on (blank), etc...

 

I managed to set up printing from laptop on my own so I'm not a complete dummy, but when it comes to what I'm trying to do now, my desire has exceeded my ability.

 

I hope someone can give me a complete step by step for what I'm trying to do.

Prior to today, had att dsl connected via ethernet cable from westell modem to desktop and wireless connection from modem to laptop.  Wired printer connected to desktop was shared with laptop via same modem.  Uverse service was installed today.  Laptop can no longer access printer.

 

I want to keep printer connected to desktop via LPT1 and share with laptop via wireless connection.

 

My knowledge is very limited when it comes to networks, modems, wireless connections, etc...  So, if you can help me, please limit use of acronyms and technical jargon and polysyllabic words e.g., go to (blank), click on (blank), etc...

 

I managed to set up printing from laptop on my own so I'm not a complete dummy, but when it comes to what I'm trying to do now, my desire has exceeded my ability.

 

I hope someone can give me a complete step by step for what I'm trying to do.

0
(0)
  • Rate this reply
View profile
Solved
Jan 13, 2011 10:20:15 AM
0
(0)
Guru

Try this. With both your desktop and laptop turned on, follow these steps on each:

 

1. Go to Start>All Programs>Accessories>Command Prompt

2. Type ipconfig /flushdns and hit Enter.

3. Type ipconfig /registerdns and hit Enter.

 

Now, try viewing workgroup computers and accessing each. (Start>My Newtwork Places>View Workgroup Computers)

Accepted Solution

printer wired to desktop no longer accessed by laptop wireless connect. post uverse install

2,763 views
7 replies
(0) Me too
(0) Me too
Reply
View all replies
(7)
0
(0)
  • Rate this reply
View profile
Jan 13, 2011 5:39:57 AM
0
(0)
Guru

What is the OS of your desktop (Windows 7? XP? Mac?). Is your desktop visible on the network from your lappy? Is sharing verified enabled on your desktop? A little more info is needed.

What is the OS of your desktop (Windows 7? XP? Mac?). Is your desktop visible on the network from your lappy? Is sharing verified enabled on your desktop? A little more info is needed.

Re: printer wired to desktop no longer accessed by laptop wireless connect. post uverse install

2 of 8 (2,714 Views)
0
(0)
  • Rate this reply
View profile
Jan 13, 2011 9:15:44 AM
0
(0)
Tutor

Both desktop and laptop are running a version of XP.  Laptop purchased later has XP Media Edition.  Printer sharing is turned on, on desktop.  Was working before Uverse.  Regarding laptop seeing desktop, when I go to My Network Places, I see a msn website, sbared docs on the laptop and shared docs on the desktop.  When I try to view workgroup computers, I get an error message that says, "Workgroup is not accessible.  You might not have permission to use the network resource...  The network path was not found."

Both desktop and laptop are running a version of XP.  Laptop purchased later has XP Media Edition.  Printer sharing is turned on, on desktop.  Was working before Uverse.  Regarding laptop seeing desktop, when I go to My Network Places, I see a msn website, sbared docs on the laptop and shared docs on the desktop.  When I try to view workgroup computers, I get an error message that says, "Workgroup is not accessible.  You might not have permission to use the network resource...  The network path was not found."

Re: printer wired to desktop no longer accessed by laptop wireless connect. post uverse install

3 of 8 (2,693 Views)
0
(0)
  • Rate this reply
View profile
Solved
Jan 13, 2011 10:20:15 AM
0
(0)
Guru

Try this. With both your desktop and laptop turned on, follow these steps on each:

 

1. Go to Start>All Programs>Accessories>Command Prompt

2. Type ipconfig /flushdns and hit Enter.

3. Type ipconfig /registerdns and hit Enter.

 

Now, try viewing workgroup computers and accessing each. (Start>My Newtwork Places>View Workgroup Computers)

Try this. With both your desktop and laptop turned on, follow these steps on each:

 

1. Go to Start>All Programs>Accessories>Command Prompt

2. Type ipconfig /flushdns and hit Enter.

3. Type ipconfig /registerdns and hit Enter.

 

Now, try viewing workgroup computers and accessing each. (Start>My Newtwork Places>View Workgroup Computers)

Re: printer wired to desktop no longer accessed by laptop wireless connect. post uverse install

4 of 8 (2,681 Views)
Solution
0
(0)
  • Rate this reply
View profile
Jan 13, 2011 10:34:08 AM
0
(0)
Master
Edited by randyl on Jan 13, 2011 at 10:35:25 AM

thoughts

 

1  ip range change

2  firewall rules change  (since router has been changed )

 

  note :  os (xp) problem

thoughts

 

1  ip range change

2  firewall rules change  (since router has been changed )

 

  note :  os (xp) problem

Re: printer wired to desktop no longer accessed by laptop wireless connect. post uverse install

[ Edited ]
5 of 8 (2,673 Views)
0
(0)
  • Rate this reply
View profile
Jan 13, 2011 1:32:13 PM
0
(0)
Tutor

Tried your steps.  Initially, desktop saw laptop in workgroup.  Laptop only saw itself.  Ran steps again on laptop.  Tried to view workgroup.  Laptop locked up.  Tried to shut off, got hung up on installing an update.  Said don't turn off computer, it will turn off automatically when finished updating.  Half hour later it hadn't so I did.  Rebooted, ran steps again on laptop.  Still didn't see desktop.  Then lost wireless connection twice.  First time did the "diagnose problem".  Was reconnected but immediately lost again.  Viewed connection, clicked "repair".  Got connection back again.  Viewed workgroup from laptop.  Desktop was listed.  pulled up printer, clicked on properties, they were displayed.  Printed a test page.  It printed.

 

You are a genius!  Thank you very much.  Hopefully this will be of assistance to many others in my same position.  AT&T regular support said that this problem was beyond their realm of solutions but that their for fee tech. support could probably assist.  In all the searching I had done, I didn't once see your solution.  And, it is the simplest of all that I read.  Thanks again. 

Tried your steps.  Initially, desktop saw laptop in workgroup.  Laptop only saw itself.  Ran steps again on laptop.  Tried to view workgroup.  Laptop locked up.  Tried to shut off, got hung up on installing an update.  Said don't turn off computer, it will turn off automatically when finished updating.  Half hour later it hadn't so I did.  Rebooted, ran steps again on laptop.  Still didn't see desktop.  Then lost wireless connection twice.  First time did the "diagnose problem".  Was reconnected but immediately lost again.  Viewed connection, clicked "repair".  Got connection back again.  Viewed workgroup from laptop.  Desktop was listed.  pulled up printer, clicked on properties, they were displayed.  Printed a test page.  It printed.

 

You are a genius!  Thank you very much.  Hopefully this will be of assistance to many others in my same position.  AT&T regular support said that this problem was beyond their realm of solutions but that their for fee tech. support could probably assist.  In all the searching I had done, I didn't once see your solution.  And, it is the simplest of all that I read.  Thanks again. 

Re: printer wired to desktop no longer accessed by laptop wireless connect. post uverse install

6 of 8 (2,650 Views)
0
(0)
  • Rate this reply
View profile
Jan 13, 2011 2:59:00 PM
0
(0)
Guru

Glad to help.

Glad to help.

Re: printer wired to desktop no longer accessed by laptop wireless connect. post uverse install

7 of 8 (2,630 Views)
0
(0)
  • Rate this reply
View profile
Mar 12, 2013 6:29:51 AM
0
(0)
Contributor

I too had a wireless printer that would be seen by my network once on Uverse. Solution was to use the WPS (Wifi Protected Setup) capability. This involved pressing a WPS button on both the router and the printer to have them recognize each other (but first getting the printer to print out a WPS secret code). 

 

Then going to the admin interface of the router and enabling WPS mode and entering the code from the printer.

 

Hope this helps others as this problem was very difficult to solve.

I too had a wireless printer that would be seen by my network once on Uverse. Solution was to use the WPS (Wifi Protected Setup) capability. This involved pressing a WPS button on both the router and the printer to have them recognize each other (but first getting the printer to print out a WPS secret code). 

 

Then going to the admin interface of the router and enabling WPS mode and entering the code from the printer.

 

Hope this helps others as this problem was very difficult to solve.

Re: printer wired to desktop no longer accessed by laptop wireless connect. post uverse install

8 of 8 (1,290 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post