Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Apr 28, 2011
1:42:52 PM
i3812v (iNID) Question

Aggregate Stats never add up for Cummulative. Seconds w/Errors and Cummulative. Sec w/Severe Errors:

So when I look at this from a UVRT perspective it only gets part of the story.   Anyone else with and iNID seeing this same behavior?

 

Here is my line 1, line 2 and aggregated info:

DSL Link Errors

Collected for 0:11:55

Reset 24-hr int. 15-min int. Last Event

SinceCurrentCurrentTime Since

DSL
Physical Line 1
Link Retrains1110:10:28
DSL Training Errors1110:10:19
Training Timeouts0000:00:00
Loss of Framing Failures5550:10:29
Loss of Signal Failures5550:10:29
Loss of Power Failures0000:00:00
Loss of Margin Failures5550:10:29
Cumm. Seconds w/Errors5550:10:29
Cumm. Sec. w/Severe Errors5550:10:29
Corrected Blocks4630446304463040:10:29
Uncorrectable Blocks1273127312730:10:29
DSL Unavailable Seconds1071071070:09:45
Physical Line 2
Link Retrains1110:10:26
DSL Training Errors4440:10:09
Training Timeouts0000:00:00
Loss of Framing Failures4440:10:27
Loss of Signal Failures4440:10:27
Loss of Power Failures0000:00:00
Loss of Margin Failures4440:10:27
Cumm. Seconds w/Errors4440:10:27
Cumm. Sec. w/Severe Errors4440:10:27
Corrected Blocks3970639706397060:07:16
Uncorrectable Blocks1027102710270:10:27
DSL Unavailable Seconds1351351350:09:36
Aggregated Information
Loss of Framing Failures9990:10:27
Cumm. Seconds w/Errors2220:10:29
Cumm. Sec. w/Severe Errors2220:10:29
Corrected Blocks8601086010860100:07:16
Uncorrectable Blocks2300230023000:10:27

Aggregate Stats never add up for Cummulative. Seconds w/Errors and Cummulative. Sec w/Severe Errors:

So when I look at this from a UVRT perspective it only gets part of the story.   Anyone else with and iNID seeing this same behavior?

 

Here is my line 1, line 2 and aggregated info:

DSL Link Errors

Collected for 0:11:55

Reset 24-hr int. 15-min int. Last Event

SinceCurrentCurrentTime Since

DSL
Physical Line 1
Link Retrains1110:10:28
DSL Training Errors1110:10:19
Training Timeouts0000:00:00
Loss of Framing Failures5550:10:29
Loss of Signal Failures5550:10:29
Loss of Power Failures0000:00:00
Loss of Margin Failures5550:10:29
Cumm. Seconds w/Errors5550:10:29
Cumm. Sec. w/Severe Errors5550:10:29
Corrected Blocks4630446304463040:10:29
Uncorrectable Blocks1273127312730:10:29
DSL Unavailable Seconds1071071070:09:45
Physical Line 2
Link Retrains1110:10:26
DSL Training Errors4440:10:09
Training Timeouts0000:00:00
Loss of Framing Failures4440:10:27
Loss of Signal Failures4440:10:27
Loss of Power Failures0000:00:00
Loss of Margin Failures4440:10:27
Cumm. Seconds w/Errors4440:10:27
Cumm. Sec. w/Severe Errors4440:10:27
Corrected Blocks3970639706397060:07:16
Uncorrectable Blocks1027102710270:10:27
DSL Unavailable Seconds1351351350:09:36
Aggregated Information
Loss of Framing Failures9990:10:27
Cumm. Seconds w/Errors2220:10:29
Cumm. Sec. w/Severe Errors2220:10:29
Corrected Blocks8601086010860100:07:16
Uncorrectable Blocks2300230023000:10:27
0
(0)
  • Rate this reply
View profile
Solved
Apr 28, 2011 2:28:46 PM
0
(0)
Expert
Edited by SomeJoe7777 on Apr 28, 2011 at 2:29:11 PM

As stated on page 10 of the documentation:

 


UVRT ReadMe.pdf wrote:

 

When viewing this table on an i3812V (iNID) router, the line 1 and line 2 stats are separately shown, in accordance with the iNID stats selector on the configuration page. Aggregate stats for both lines are not computed. When Aggregate Stats are selected, the line 1 stats are shown in the error table.


 

 

Accepted Solution

i3812v (iNID) Question

684 views
2 replies
(0) Me too
(0) Me too
Reply
View all replies
(2)
0
(0)
  • Rate this reply
View profile
Solved
Apr 28, 2011 2:28:46 PM
0
(0)
Expert
Edited by SomeJoe7777 on Apr 28, 2011 at 2:29:11 PM

As stated on page 10 of the documentation:

 


UVRT ReadMe.pdf wrote:

 

When viewing this table on an i3812V (iNID) router, the line 1 and line 2 stats are separately shown, in accordance with the iNID stats selector on the configuration page. Aggregate stats for both lines are not computed. When Aggregate Stats are selected, the line 1 stats are shown in the error table.


 

 

As stated on page 10 of the documentation:

 


UVRT ReadMe.pdf wrote:

 

When viewing this table on an i3812V (iNID) router, the line 1 and line 2 stats are separately shown, in accordance with the iNID stats selector on the configuration page. Aggregate stats for both lines are not computed. When Aggregate Stats are selected, the line 1 stats are shown in the error table.


 

 

Re: i3812v (iNID) Question

[ Edited ]
2 of 3 (675 Views)
Solution
0
(0)
  • Rate this reply
View profile
Apr 28, 2011 3:36:26 PM
0
(0)
Mentor
Ok so 2wire's and my definition of aggregated are different as your tool is only pulling what info the API to the device is presenting
Ok so 2wire's and my definition of aggregated are different as your tool is only pulling what info the API to the device is presenting

Re: i3812v (iNID) Question

3 of 3 (671 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post