Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Jul 10, 2013
8:40:29 PM
NVG510 Open ports refusing connection.
Edited by Rideaway on Jul 10, 2013 at 8:41:32 PM

PROBLEM

 

Pics at the bottom.

 

I'm on a wired connection. I go into my Motorola NVG510, head to NAT/Gaming, and forward some ports. I make sure it's on the correct device (my device). 

 

I forward the ports 32657 to 32659, on both UDP and TCP. I've disabled every Firewall option on the modem, as well as my computer. I save it, apply it, and it appears in the list set for my device. Cool. Should be easy enough.

 

Wrong. I scan a closed port with http://canyouseeme.org/ -- it says connection timed out, expectedly. When I scan a port I opened via the modem, it says "connection refused". Something is refusing my connection. Nobody can connect to me via that port, even after opening it in the modem.

 

( For any of you ATT techs, my IP begins with 108, not 10. I tried to use your port tool regardless, but it makes me login to the ATT website in an endless loop. Pretty dumb. )

 

I've attempted to call ATT about this, and they refer me to some fee-based service that is far too expensive.

 

I'm interested in being able to open my ports when I pay for internet, just as I've always been able to do.

 

If any of you have had any experience with this ridiculous problem, let me know. I'd love some help. I've never had an issue forwarding ports in the 10+ years I've been using the internet.

 

PS: For the record, I've tried other ports as well. Tons of different ones. All the same result -- "connection refused".

 

Firewall Settings 

 

Firewall Advanced

 

Opened Ports (Should be good to go.)

 

All Set Up (Cool.)

 

32657 Refused (When opened specifically, they get refused.)

 

32658 Refused (And again.)

 

Closed/Random Port 3277 Timed Out (This is to show that normally, ports simply time out if unopened.)

 

 

EDIT: I tried IP passthrough on Default Server instead of off, and defined my device in the address box. Now any port I scan is "connection refused", I am assuming because it works like a DMZ and opened all of them. When I turn IP Passthrough off and scan a port like 80, it comes back as a timed out. 

 

 

 

TL;DR: Something is blocking my open ports. I disabled all firewalls and protectors, etc, unless there is something in the modem I missed.

PROBLEM

 

Pics at the bottom.

 

I'm on a wired connection. I go into my Motorola NVG510, head to NAT/Gaming, and forward some ports. I make sure it's on the correct device (my device). 

 

I forward the ports 32657 to 32659, on both UDP and TCP. I've disabled every Firewall option on the modem, as well as my computer. I save it, apply it, and it appears in the list set for my device. Cool. Should be easy enough.

 

Wrong. I scan a closed port with http://canyouseeme.org/ -- it says connection timed out, expectedly. When I scan a port I opened via the modem, it says "connection refused". Something is refusing my connection. Nobody can connect to me via that port, even after opening it in the modem.

 

( For any of you ATT techs, my IP begins with 108, not 10. I tried to use your port tool regardless, but it makes me login to the ATT website in an endless loop. Pretty dumb. )

 

I've attempted to call ATT about this, and they refer me to some fee-based service that is far too expensive.

 

I'm interested in being able to open my ports when I pay for internet, just as I've always been able to do.

 

If any of you have had any experience with this ridiculous problem, let me know. I'd love some help. I've never had an issue forwarding ports in the 10+ years I've been using the internet.

 

PS: For the record, I've tried other ports as well. Tons of different ones. All the same result -- "connection refused".

 

Firewall Settings 

 

Firewall Advanced

 

Opened Ports (Should be good to go.)

 

All Set Up (Cool.)

 

32657 Refused (When opened specifically, they get refused.)

 

32658 Refused (And again.)

 

Closed/Random Port 3277 Timed Out (This is to show that normally, ports simply time out if unopened.)

 

 

EDIT: I tried IP passthrough on Default Server instead of off, and defined my device in the address box. Now any port I scan is "connection refused", I am assuming because it works like a DMZ and opened all of them. When I turn IP Passthrough off and scan a port like 80, it comes back as a timed out. 

 

 

 

TL;DR: Something is blocking my open ports. I disabled all firewalls and protectors, etc, unless there is something in the modem I missed.

0
(0)
  • Rate this reply
View profile
Solved
Jul 12, 2013 4:43:05 AM
0
(0)
ACE - Expert
Edited by JefferMC on Jul 12, 2013 at 5:27:02 AM

If there is no software responding on the port, then the scanner can't tell if the other end just didn't respond or the packet was blocked.

 

You need to be running the game or something...  However, just starting the game probably doesn't mean it's listening on all these ports.

 

 

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.
Accepted Solution

NVG510 Open ports refusing connection.

[ Edited ]
5,410 views
5 replies
(0) Me too
(0) Me too
Reply
View all replies
(5)
0
(0)
  • Rate this reply
View profile
Jul 11, 2013 6:42:13 AM
0
(0)
ACE - Expert

One thing I'd like to ask:

 

What application/service do you have running on the target PC that will respond when the port scan attempts to connect to the port you have set up forwarding for?

 

One thing I'd like to ask:

 

What application/service do you have running on the target PC that will respond when the port scan attempts to connect to the port you have set up forwarding for?

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: NVG510 Open ports refusing connection.

2 of 6 (5,360 Views)
0
(0)
  • Rate this reply
View profile
Jul 12, 2013 12:39:33 AM
0
(0)
Tutor
Edited by Rideaway on Jul 12, 2013 at 12:57:16 AM

Nothing. Literally nothing. No firewall, no virus protector, no windows defender, nothing. Completely clean.

 

The only thing I can think of is Hamachi but it's closed/disabled. To reiterate what I said in the main post: All of my ports show refused for some reason, when I open them via IP passthrough. 

 

I also checked with canyouseeme.org on other wired computers in the household. Same issue. Connection refused regardless of which ports I open. No windows firewall/defender/virus protector on those, either.

 

If ports are tested with canyouseeme.org while:

 

A) Open, we get: Connection Refused

B) Closed, we get: Connection Timed Out

 

I've attempted this on over 10 different ports, randomly selected, or picked from the list.

 

Weird. Really makes me wonder if AT&T isn't doing it from their end. I've asked Tier 1 and Tier 2 / Managers, they say they don't. 

Nothing. Literally nothing. No firewall, no virus protector, no windows defender, nothing. Completely clean.

 

The only thing I can think of is Hamachi but it's closed/disabled. To reiterate what I said in the main post: All of my ports show refused for some reason, when I open them via IP passthrough. 

 

I also checked with canyouseeme.org on other wired computers in the household. Same issue. Connection refused regardless of which ports I open. No windows firewall/defender/virus protector on those, either.

 

If ports are tested with canyouseeme.org while:

 

A) Open, we get: Connection Refused

B) Closed, we get: Connection Timed Out

 

I've attempted this on over 10 different ports, randomly selected, or picked from the list.

 

Weird. Really makes me wonder if AT&T isn't doing it from their end. I've asked Tier 1 and Tier 2 / Managers, they say they don't. 

Re: NVG510 Open ports refusing connection.

[ Edited ]
3 of 6 (5,336 Views)
0
(0)
  • Rate this reply
View profile
Solved
Jul 12, 2013 4:43:05 AM
0
(0)
ACE - Expert
Edited by JefferMC on Jul 12, 2013 at 5:27:02 AM

If there is no software responding on the port, then the scanner can't tell if the other end just didn't respond or the packet was blocked.

 

You need to be running the game or something...  However, just starting the game probably doesn't mean it's listening on all these ports.

 

 

 

If there is no software responding on the port, then the scanner can't tell if the other end just didn't respond or the packet was blocked.

 

You need to be running the game or something...  However, just starting the game probably doesn't mean it's listening on all these ports.

 

 

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: NVG510 Open ports refusing connection.

[ Edited ]
4 of 6 (5,293 Views)
Solution
0
(0)
  • Rate this reply
View profile
Jul 12, 2013 11:27:21 AM
0
(0)
Tutor

I see. That makes sense. I would have never thought of that. I just assumed CYSM.org would report it open even without a service actively accepting it.

 

I started up the program, and checked the port -- success. Port is open. Thank you.

I see. That makes sense. I would have never thought of that. I just assumed CYSM.org would report it open even without a service actively accepting it.

 

I started up the program, and checked the port -- success. Port is open. Thank you.

Re: NVG510 Open ports refusing connection.

5 of 6 (5,273 Views)
Highlighted
0
(0)
  • Rate this reply
View profile
Jul 12, 2013 12:21:01 PM
0
(0)
ACE - Expert

Glad you got it working.

 

Glad you got it working.

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: NVG510 Open ports refusing connection.

6 of 6 (5,263 Views)
Share this post
Share this post