Contributor
•
3 Messages
Motorola VAP2500
Hi
I have the motorola vap 2500 wireless access point from ATT. I found that it does have a web configuration interface. But I do not know the login and password. I have tried all the userid/password combinations out there in the web for motorola devices. But nothing has worked. Thinking of using hydra at this point.
Btw, I did reset the device as well.
If anybody has any knowledge of how to login to the Motorola VAP 2500,
Thanks
Satanand
Computer_Joe
Master
•
5.9K Messages
11 years ago
As far as I know the VAP2500 is not a standard access point. It's supposed to be used with the Uverse wireless TV receivers, and should be preconfigured for that purpose.
I don't think there is an actual log in/user ID. If you are connected to your gateway via an Ethernet cable, you should be able to access the VAP2500 user interface by typing it's IP address into your browser. The password for making configuration changes should be printed on the VAP2500 somewhere.
__________________________________________________________
How can you be in two places at once, when your not anywhere at all?
------------------------------------------------------------------------------------------------------
I really want to become a procrastinator, but I keep putting it off.
------------------------------------------------------------------------------------------------------
There are three kinds of people, those that can count, and those that can't.
------------------------------------------------------------------------------------
“Our great democracies still tend to think that a stupid man is more likely to be honest than a clever man, and our politicians take advantage of this prejudice by pretending to be even more stupid than nature has made them." :Bertrand Russell
0
0
Darknessrise
Professor
•
2.4K Messages
11 years ago
Try:
User: ATTadmin
Password: 2500!VAP
Worth a try... I guess :/.
0
0
satanand
Contributor
•
3 Messages
11 years ago
it is preconfigured. But I want to change the operating channels in 5 GHz. It does have a web configuration interface.
and the userid and password are not printed on it.
Regards
satanand
0
0
satanand
Contributor
•
3 Messages
11 years ago
Well thats the first one I tried. It does not work.
Regards
Satanand.
0
0
ch8ds1
Tutor
•
10 Messages
10 years ago
I've also found that resetting the device does not work. I can't find anything online that has the correct default login info. I'm showing 2 wireless receivers connecting when I only have one. I'd like to block the 2nd device or even set mac filters or something for those.
0
0
timonuttall
Contributor
•
1 Message
10 years ago
Satanand - did you try Hydra? What did you find out?
0
0
anothertxguy
Tutor
•
8 Messages
10 years ago
Normally I'm fairly caught up with different network tools, but I can't figure out what Hydra is for the life of me. I know someone used to keep a public list of default passwords, but I can't remember that site either.
Also, I'm not sure if I should start a new thread or just stay here, but other than running a free wireless network scanner, does anyone know of a way to tell what the VAP2500 is using? 2.4ghz, and channel? 5ghz and channel? Does it broadcast and ID? I hate not having good documentation or access to the configuration.
Like many people I run a router behind the RG for GigE and 802.11n, and I like to know how my equipment is layed out.
Thanks for any info,
Jim
0
0
JefferMC
ACE - Expert
•
35.1K Messages
10 years ago
It uses normal 802.11n channels in the 5 Ghz frequency space. I'm sure it dynamically selects a channel based on conditions.
0
anothertxguy
Tutor
•
8 Messages
10 years ago
Thanks JefferMC, it's just too bad they don't provide the current information on the homepage the same as the RG.
0
0
Darknessrise
Professor
•
2.4K Messages
10 years ago
The VAP can be seen on inSSIDer. It used 5 GHz with 4x4 N(600 Mbps). It can use the newer 5 GHz channels from what I saw 52+58 and 108+112(Probably more, but I haven't had the chance to see it use more than those others).
It broadcasts with the network name "MotoVAP_xxxxxxxxxxxx"
0