Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Jan 26, 2014
6:10:00 PM
How can I connect 2 wired devices to one outlet?

I have a U verse receiver and PC in the same room. I had the PC connected to the gateway using wireless and the receiver was connected hard wired to an ethernet outlet in the wall back to the gateway. The PC now has an issue with the wireless network card so I am having to use the wired connection that was for the receiver. So now I can only use either the PC or the TV, but not both. Is there any kind of hub or switch I can use to allow me to connect the receiver and PC hardwired into one wall outlet so I can use them both at the same time?

Any advice gratefully received.

I have a U verse receiver and PC in the same room. I had the PC connected to the gateway using wireless and the receiver was connected hard wired to an ethernet outlet in the wall back to the gateway. The PC now has an issue with the wireless network card so I am having to use the wired connection that was for the receiver. So now I can only use either the PC or the TV, but not both. Is there any kind of hub or switch I can use to allow me to connect the receiver and PC hardwired into one wall outlet so I can use them both at the same time?

Any advice gratefully received.

0
(0)
  • Rate this reply
View profile
Solved
Jan 26, 2014 6:55:25 PM
0
(0)
Employee
May be time to look at wireless receiver ($49 one time fee, billing stays same) replacing the hardwired receiver.
Or consider a Gigabit switch such as Netgear GS108, but as stated ideally iptv traffic should be separate from internet.
*I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.
Accepted Solution

How can I connect 2 wired devices to one outlet?

467 views
6 replies
(0) Me too
(0) Me too
Reply
View all replies
(6)
Highlighted
0
(0)
  • Rate this reply
View profile
Solved
Jan 26, 2014 6:22:45 PM
0
(0)
ACE - Expert
ewokscott - It is not a good idea to mix TV and computer access on the same cat5 back to the RG. The TV tends to flood the switch. Can you run another wire? Monoprice,com is a good source.
ewokscott - It is not a good idea to mix TV and computer access on the same cat5 back to the RG. The TV tends to flood the switch. Can you run another wire? Monoprice,com is a good source.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: How can I connect 2 wired devices to one outlet?

2 of 7 (464 Views)
Solution
0
(0)
  • Rate this reply
View profile
Jan 26, 2014 6:55:20 PM
0
(0)
ACE - Expert

You could also buy two switches with VLAN capability, but that sounds a rather expensive solution.

 

You could also buy two switches with VLAN capability, but that sounds a rather expensive solution.

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: How can I connect 2 wired devices to one outlet?

3 of 7 (452 Views)
0
(0)
  • Rate this reply
View profile
Solved
Jan 26, 2014 6:55:25 PM
0
(0)
Employee
May be time to look at wireless receiver ($49 one time fee, billing stays same) replacing the hardwired receiver.
Or consider a Gigabit switch such as Netgear GS108, but as stated ideally iptv traffic should be separate from internet.
May be time to look at wireless receiver ($49 one time fee, billing stays same) replacing the hardwired receiver.
Or consider a Gigabit switch such as Netgear GS108, but as stated ideally iptv traffic should be separate from internet.
*I am an AT&T employee and the postings on this site are my own and don’t necessarily represent AT&T’s position, strategies or opinions.

Re: How can I connect 2 wired devices to one outlet?

4 of 7 (451 Views)
Solution
0
(0)
  • Rate this reply
View profile
Jan 26, 2014 9:54:08 PM
0
(0)
Tutor

Thanks all for the quick replies and for shedding some light on the issue, much appreciated. Unfortunately running another wire isnt an option really, the gateway is on the other side of the house. Looks like getting the wireless issue on the PC fixed or a wireless receiver will be my best option.

Thanks all for the quick replies and for shedding some light on the issue, much appreciated. Unfortunately running another wire isnt an option really, the gateway is on the other side of the house. Looks like getting the wireless issue on the PC fixed or a wireless receiver will be my best option.

Re: How can I connect 2 wired devices to one outlet?

5 of 7 (434 Views)
0
(0)
  • Rate this reply
View profile
Mar 24, 2014 1:15:53 PM
0
(0)
Tutor

Just wanted to offer an update on this issue. I had a U-Verse tech come out to address a different internet problem. I mentioned this issue to him and he said it could be done using a gigabit switch. I now have the one wired outlet from the gateway feeding the gigabit switch and a U-Verse receiver and 2 PCs hardwired from the switch and it works just fine, no interruptions at all and the speed is much better compared to the wireless.

Just wanted to offer an update on this issue. I had a U-Verse tech come out to address a different internet problem. I mentioned this issue to him and he said it could be done using a gigabit switch. I now have the one wired outlet from the gateway feeding the gigabit switch and a U-Verse receiver and 2 PCs hardwired from the switch and it works just fine, no interruptions at all and the speed is much better compared to the wireless.

Re: How can I connect 2 wired devices to one outlet?

6 of 7 (241 Views)
0
(0)
  • Rate this reply
View profile
Mar 24, 2014 1:21:52 PM
0
(0)
ACE - Expert

ewokscott wrote:

Just wanted to offer an update on this issue. I had a U-Verse tech come out to address a different internet problem. I mentioned this issue to him and he said it could be done using a gigabit switch. I now have the one wired outlet from the gateway feeding the gigabit switch and a U-Verse receiver and 2 PCs hardwired from the switch and it works just fine, no interruptions at all and the speed is much better compared to the wireless.


Yes, normally you can do this.  However, you cannot place a wireless access point or router on that switch that is shared with the U-verse receiver without some major issues.

 


ewokscott wrote:

Just wanted to offer an update on this issue. I had a U-Verse tech come out to address a different internet problem. I mentioned this issue to him and he said it could be done using a gigabit switch. I now have the one wired outlet from the gateway feeding the gigabit switch and a U-Verse receiver and 2 PCs hardwired from the switch and it works just fine, no interruptions at all and the speed is much better compared to the wireless.


Yes, normally you can do this.  However, you cannot place a wireless access point or router on that switch that is shared with the U-verse receiver without some major issues.

 

*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: How can I connect 2 wired devices to one outlet?

7 of 7 (237 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post