Contributor
•
2 Messages
Connecting a device to the STB
I purchased a BluRay player and then discovered that my Home Theatre receiver does not accept HDMI inputs. So, the only way to play the BluRay disks is through the TV speakers.
I am wondering if there is a way to connect the BluRay player to my STB/RG, which uses the optical output to connect to my Home theatre receiver.
My BluRay player does have a digital coax output as well as the HDMI output.
Accepted Solution
Official Solution
aviewer
Expert
•
10.1K Messages
11 years ago
So, it sounds like you have an optical input available & a COAX output. Here are some converters - http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=coax%20to%20optical%20converter&sprefix=coax+to+op%2Caps&rh=i%3Aaps%2Ck%3Acoax%20to%20optical%20converter
0
0
aviewer
Expert
•
10.1K Messages
11 years ago
What are your model numbers so I can look up what input/output is available & look for a converter. Is surround required or is Stereo OK?
0
0
DWPerkins
Contributor
•
2 Messages
11 years ago
I can just connect the bluray directly to my TV and get stereo sound. I was hoping to be able to use it through my Surround Sound system, but that system is limited (no inputs).
Thanks for your help
0
0