Ask a question
Search in U-verse Forums

U-verse Forums

Reply
Posted Apr 13, 2013
7:22:56 AM
Change the name of a Home Network Device

I'd like to change the name of some of the Home Network Devices that appear on my Gateway's Summary page from "unknown" to a more descriptive name.  How do I do this?

I'd like to change the name of some of the Home Network Devices that appear on my Gateway's Summary page from "unknown" to a more descriptive name.  How do I do this?

0
(0)
  • Rate this reply
View profile
Solved
Apr 23, 2013 5:27:07 PM
0
(0)
Mentor
Accepted Solution

Change the name of a Home Network Device

5,343 views
8 replies
(0) Me too
(0) Me too
Reply
View all replies
(8)
0
(0)
  • Rate this reply
View profile
Apr 13, 2013 11:23:11 AM
0
(0)
Teacher

https://www.telecombusinesshub.co.nz/PDF/2Wire%20User%20Guide.pdf

 

 

 

If you defined a name for your computer during System Setup or when your computer was set up, the name
displays next to the device. However, there are two instances where the device name will not appear:


• If your computer was manually configured with a static IP address, the static IP address displays
instead of the computer’s name.
• If you have not named the device but it still obtains its Internet address from the system, the word
“Unknown” displays.


You can change the name of the device so that it will display in the system user interface by clicking the
Change name link.

https://www.telecombusinesshub.co.nz/PDF/2Wire%20User%20Guide.pdf

 

 

 

If you defined a name for your computer during System Setup or when your computer was set up, the name
displays next to the device. However, there are two instances where the device name will not appear:


• If your computer was manually configured with a static IP address, the static IP address displays
instead of the computer’s name.
• If you have not named the device but it still obtains its Internet address from the system, the word
“Unknown” displays.


You can change the name of the device so that it will display in the system user interface by clicking the
Change name link.

Re: Change the name of a Home Network Device

2 of 9 (5,322 Views)
0
(0)
  • Rate this reply
View profile
Apr 13, 2013 3:47:07 PM
0
(0)
Tutor

Thanks for trying, izmeeh, but I can't find a "change name" link on my router's web interface.  I have the 2Wire model 3801HGV.

Thanks for trying, izmeeh, but I can't find a "change name" link on my router's web interface.  I have the 2Wire model 3801HGV.

Re: Change the name of a Home Network Device

3 of 9 (5,305 Views)
0
(0)
  • Rate this reply
View profile
Apr 13, 2013 4:14:47 PM
0
(0)
ACE - Expert
thomprod - On the first page - down at the bottom - click on Home networking - You will get a list of devices - some records have an edit name link.
thomprod - On the first page - down at the bottom - click on Home networking - You will get a list of devices - some records have an edit name link.
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Change the name of a Home Network Device

4 of 9 (5,303 Views)
0
(0)
  • Rate this reply
View profile
Apr 15, 2013 12:18:20 PM
0
(0)
Tutor
Sorry, aviewer, but if there was an edit name link, I would have used it. There is none.
Sorry, aviewer, but if there was an edit name link, I would have used it. There is none.

Re: Change the name of a Home Network Device

5 of 9 (5,259 Views)
0
(0)
  • Rate this reply
View profile
Solved
Apr 23, 2013 5:27:07 PM
0
(0)
Mentor

Re: Change the name of a Home Network Device

6 of 9 (5,164 Views)
Solution
0
(0)
  • Rate this reply
View profile
Apr 23, 2013 8:20:41 PM
0
(0)
ACE - Master

When I set up each of our three computers.....my wife's iPad....and both of our smart phones.....I gave each of them their own name during that device set up procedure.   Those names automatically became their names in the home network.   So I would think you would need to go the place in your device's operating system where you can change its name.  I personally don't believe that you would make the change in the RG or separate router.   At least that is the way I would tackle it.

The problem with socialism is that you eventually run out of other peoples' money. .......Margaret Thatcher

When I set up each of our three computers.....my wife's iPad....and both of our smart phones.....I gave each of them their own name during that device set up procedure.   Those names automatically became their names in the home network.   So I would think you would need to go the place in your device's operating system where you can change its name.  I personally don't believe that you would make the change in the RG or separate router.   At least that is the way I would tackle it.

The problem with socialism is that you eventually run out of other peoples' money. .......Margaret Thatcher
*The views and opinions expressed on this forum are purely my own. Any product claim, statistic, quote, or other representation about a product or service should be verified with the manufacturer, provider, or party.

Re: Change the name of a Home Network Device

7 of 9 (5,141 Views)
0
(0)
  • Rate this reply
View profile
Apr 24, 2013 9:44:15 AM
0
(0)
Mentor

When I had a 3800 RG, I was able to rename all of my devices directly in the RG interface. I just had that RG replaced with a 3801, and I noticed that most of the entries for my devices didn't have the link to rename the device. So the RG gave each device a name that seemed to be based in part on its MAC address. The one exception was my Windows desktop, which eventually appeared with the computer name I had assigned to it. The other devices included an iPhone, iPad, WiFi connected printer, Xbox, and a few other devices. Nothing I did to try to rename the devices worked except for that link I posted above. There seems to be an additional page hidden in the RG web interface that can be accessed with this method that allows you to rename a device. Worked for me and it's worth a try.

When I had a 3800 RG, I was able to rename all of my devices directly in the RG interface. I just had that RG replaced with a 3801, and I noticed that most of the entries for my devices didn't have the link to rename the device. So the RG gave each device a name that seemed to be based in part on its MAC address. The one exception was my Windows desktop, which eventually appeared with the computer name I had assigned to it. The other devices included an iPhone, iPad, WiFi connected printer, Xbox, and a few other devices. Nothing I did to try to rename the devices worked except for that link I posted above. There seems to be an additional page hidden in the RG web interface that can be accessed with this method that allows you to rename a device. Worked for me and it's worth a try.

Re: Change the name of a Home Network Device

8 of 9 (5,123 Views)
Highlighted
0
(0)
  • Rate this reply
View profile
Apr 30, 2013 2:26:54 PM
0
(0)
Tutor

Thank you, Ponzi.  I followed the linked instructions and they worked perfectly.  All devices are now named.

Thank you, Ponzi.  I followed the linked instructions and they worked perfectly.  All devices are now named.

Re: Change the name of a Home Network Device

9 of 9 (5,050 Views)
Advanced
You must be signed in to add attachments
Share this post
Share this post